Results 1 to 2 of 2
  1. #1
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default Finish softens with meths - what is it

    Hi. We have some mid-century Parker dining chairs that I’d like to redo. The finish on the timber is still pretty good so I don’t want to refinish, just reinvigorate. I believe they were made in the sixties or seventies. I tested some surface with meths and it softened the finish. I know that’s typical of a shellac finish but the period doesn’t sound right for French polish - more likely nitrocellulose or some other type of industrial lacquer.

    I also noted that when some finish was removed the grain looked white, as though filled with that white powder (can’t remember what) used as a grain filler which I typically associate with French polishing.

    So my questions are.
    1. Does meths soften nitrocellulose, or anything else used in the period besides shellac?
    2. Anyone know what Parker and other makers used in this period? I googled this, a lot of speculation but no-one who actually knew.
    3. Can anyone recommend a good wipe-on rejuvenation product - if it’s shellac or if it’s nitro? I’d just like to make them look their best with minimal interference.

    Attached is photo, in case it helps.
    Cheers
    Arron

    Also, I’ll be putting a post about reupholstering these in the upholstery subforum. If you know anything about chairs of this period please have a look.


    2EF1B3B0-D249-4C37-8CD8-E9FCFFC0F84D.jpg
    Apologies for unnoticed autocomplete errors.

  2. #2
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    510

    Default

    Sounds like shellac or french polish to me. Particularly the white filler.

Similar Threads

  1. Cutting 2-Pac Matt Finish to get a satin finish
    By Brendon5374 in forum FINISHING
    Replies: 8
    Last Post: 1st February 2011, 11:55 PM
  2. Industrial Meths - Sydney
    By jmk89 in forum FINISHING
    Replies: 4
    Last Post: 30th October 2010, 08:02 AM
  3. Industrial Meths
    By jes00m in forum FINISHING
    Replies: 52
    Last Post: 7th January 2008, 09:49 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •