![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
-
6th October 2023, 10:36 AM #1
Sourcing Replacment Woodmaster Jointer Blades
I have to source replacement jointer blades for a Woodmaster 6".
Where is the best place to buy replacements for these old machines?
-
6th October 2023, 01:02 PM #2
If they're standard knives pretty any sharpening business can supply them. HSS blanks are available in 3 and 3.2mm thicknesses 20-25mm wide and can be cut to length.
If they have holes in them it becomes pricey as they need to be made from something like O1, machined as required and then heat treated to harden them.
Got any pics and/or measurements?Nothing succeeds like a budgie without a beak.
-
6th October 2023, 02:05 PM #3
What are the blade dimensions? I think I have some six inch blades at the bottom of a drawer somewhere.
Franklin