![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Dust Extractor Stalling
-
5th September 2023, 06:54 PM #1
Member
- Join Date
- Jun 2007
- Location
- Melbourne
- Age
- 44
- Posts
- 41
Dust Extractor Stalling
I have a 2Hp, single phase, older model dust extractor that every once and a while stalls at start up - ie: you can hear that the motor is trying to turn, but does not start spinning. When that occurs I give the blades a bit of a turn with a wooden rod through the dust hose port (when OFF), and when I start it up again, it works as normal. Has anyone else had similar issues, and is there a solution?
Thanks
-
5th September 2023, 06:59 PM #2
Most likely the start capacitor is failing.
It is usually a round canister on the side of the motor.
If you are not experienced around electrical get an electrician to assist.
-
5th September 2023, 07:10 PM #3
Member
- Join Date
- Jun 2007
- Location
- Melbourne
- Age
- 44
- Posts
- 41