Results 1 to 10 of 10
  1. #1
    Join Date
    Nov 2005
    Location
    East Vic Park WA
    Posts
    11

    Default re laminating kitchen

    Hi everyonce,
    We have a perfectly good kitchen thats only a year old, however being a woman and wanting to change everything I am not happy with the colour scheme. It is a laminex kitchen and the benches are also laminex. Is it possible to re laminate the cupboards and the benchtop? Also is it expensive ? I would need to get a profesional in as I am not that handy. Any info would be great, I ive in WA. Thanks.

  2. #2
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Jane,
    to change the colour of the doors and panels it's simplest and cheapest to get new ones made. If you have them drilled for hinges then it's a fairly simple matter to change them over. If you have a tall panel next to a fridge or wall oven and other cabinets run into this then it gets more complicated and partial dissasembly is required. It's best to replace the tops rather than to relaminate them. In order to relaminate them you would have to remove the sink and any set in appliances (ie cooktop), then sand roughly to provide a key for the glue. Trimming the laminate after gluing will be a messy business and you may be without a kitchen for a few days. Easier, quicker and less messy to have new tops made and fitted. Unfortunately it won't be cheap. There's five main price components to a kitchen, the whiteboard for the carcasses, the coloured board for the doors and panels, the tops, the hardware (hinges and drawer runners etc) and the labour to assemble and fit. You're replacing at least half of this.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  3. #3
    Join Date
    Oct 2005
    Location
    Sydney
    Age
    60
    Posts
    149

    Default

    Yes it can be done and yes it is expensive. It is cheaper and easier to buy melamine doors than to laminate existing ones. Laminating an existing benchtop is such a pain in the _ _ _ as well! It is cheaper and easier to buy new tops. Go to a cabinetmaker for your doors and go to a benchtop manufacturer for your top.

  4. #4
    Join Date
    Sep 2004
    Location
    Sydney
    Age
    42
    Posts
    103

    Default

    have you thought about perhaps painting the doors.
    these days you can get a very wear resistant paint finish from your local paint store that if applied correctly will look really good.

    Case in point, a mate has just done this and he rounded over the edges of his cupboard doors (MDF doors) then sealed the edges (with car putty of all things) then spray painted them ferrari red. They look bloody terrific if you ask me and he installed a black countertop of some stone.

    He used an air car spray gun and some paint from.
    They look as smooth as a babys #### and don't look anything like the original doors anymore. it took him 4 weeks to do it but it was well worth it!

  5. #5
    Join Date
    Nov 2005
    Location
    East Vic Park WA
    Posts
    11

    Default

    Hi Guys,

    Thanks for the info. I think I will just learn to love the cupboards and will go ahead and change the tops only.

    I am interested in the paint idea though, My laundry cupboards are looking a bit daggy and could do with a spruce up. Puppypaw do you have the name of the paint your friend used and can you tell me if the finish was shiny or matt. Also where the laminate joins and you have that gap is that where he put the car putty ?

    Thanks, Jane

  6. #6
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    White Knight make a laminate and tile paint that can be tinted to any colour. It has a special primer and cleaner as well. I used it 4 years ago to give the kitchen cupboards a quick makeover and it is still holding up very well. I think it is about $30 p/l so a standard kitchen can be done for less than $150, no special skills required .... only painting. Available from Bunnings.
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  7. #7
    Join Date
    Sep 2004
    Location
    Sydney
    Age
    42
    Posts
    103

    Default

    Still waiting for my mate to get back too me on the name of the paint (it could take a while hes terrible with getting back to me on these things)

    The White Knight that stinkalot sugested sounds promising tho. I know the paint doesn't cost very much!

  8. #8
    Join Date
    Sep 2004
    Location
    Sydney
    Age
    42
    Posts
    103

    Default

    Sorry its taken so long to get back to you Jane.
    The product was the white knight laminate paint.
    The doors where sanding with 120 grit sandpaper and wipped down with a damn cloth and allowed to dry.
    the cleaner was then used then the paint with 6 coats (air gun) then to top it all off (I had no idea he had done this) he used car clear coat (6 coats) with wet sanding between every 2nd coat.
    Once again I have no idea that he put the clear coat on, but it looks bloody fantastic.
    Hes a perfectionist (an anal one at that)

  9. #9
    Join Date
    May 2004
    Location
    Pakenham, outer Melb SE suburb, Vic
    Age
    55
    Posts
    549

    Default

    You really hate those cloths, don't you Paw


    Cheers........Sean, eternal damnation


    The beatings will continue until morale improves.

  10. #10
    Join Date
    Sep 2004
    Location
    Sydney
    Age
    42
    Posts
    103

    Default

    Quote Originally Posted by scooter
    You really hate those cloths, don't you Paw


    Cheers........Sean, eternal damnation

Similar Threads

  1. kitchen brewing up some questions
    By sandant in forum KITCHENS
    Replies: 6
    Last Post: 9th November 2004, 04:42 PM
  2. granite kitchen benching
    By sidk in forum KITCHENS
    Replies: 2
    Last Post: 28th June 2004, 12:52 PM
  3. floating timber floors in the kitchen
    By Trav in forum FLOORING
    Replies: 24
    Last Post: 15th June 2004, 11:20 AM
  4. Replies: 17
    Last Post: 6th October 2003, 09:17 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •