Results 1 to 2 of 2
  1. #1
    Join Date
    May 2018
    Location
    Melbourne
    Posts
    27

    Default Advice on table top repair needed

    A friend has asked me to look at the tops of a side table and coffee table, both identical in style only the size differs.
    The side table has had indoor plants on it at some stage and consequently there is some water damage that has caused the finish (varnish?) to lift and crack. It seems to me that the only solution is to sand it back and re-seal. I feel sure that the top is veneered as the timber underneath looks similar but is not quite the same. Any thoughts on the best way to tackle this? Is it possible to match the finish so that I don't have to sand the sides as well.
    For the coffee table the top finish is sound but there are a number of white rings on it. I have some Howards Restor-A-Finish which is claimed to do such work.
    Thanks
    20230716_112117.jpg20230716_112337.jpg

  2. #2
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    287

    Default

    Definitely veneered methinks, based on the direction of the grain on the edge. I’d very carefully sand it back to bare timber. Paint stripper might work, but I don’t know whether it would cause the veneering glue to breakdown. Hopefully someone else knows the answer to that question.

Similar Threads

  1. Repair to cocktail cabinet door - advice needed please
    By Koala-Man in forum RESTORATION
    Replies: 6
    Last Post: 6th February 2021, 05:29 PM
  2. Repair advice needed please- Rocking Horses/West Melb
    By RockingHorse in forum FINISHING
    Replies: 1
    Last Post: 1st August 2011, 10:29 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •