![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Square set plasterboard type
-
18th May 2023, 10:27 PM #1
Intermediate Member
- Join Date
- Sep 2020
- Location
- scone
- Age
- 46
- Posts
- 15
Square set plasterboard type
For squareset should I get sheets with one edge square or both recessed?
-
19th May 2023, 04:33 AM #2
GOLD MEMBER
- Join Date
- Apr 2018
- Location
- Nsw
- Age
- 64
- Posts
- 558
Sheet sizes and availability is usually limited with one side not tapered board and the sizes are aimed to suit commercial fittouts and I think it is dearer too.
I cant recall ever seeing it being used on domestic work as the requirements vary too much. Your setting bead works fine in all scenarios whether you have a tapered or square edge sheet end regardless