Thanks: 3
Likes: 3
Needs Pictures: 0
Picture(s) thanks: 2
Results 1 to 4 of 4
-
15th March 2023, 11:02 AM #1
More Fund Raisers or maybe a gift for someone..
More Fund Raisers or maybe a gift for someone..
Dean at Living Timbers in Penrith had some "give away" offcuts of small Camphor Laurel slabs.
Home - Living Timber Co
They were about 30-35mm thick and big enough for serving boards, so I ripped the board in the bandsaw then put them through the thicknesser.
The best figure and colour was on the handle ends so I decided to not do a hole at that end.
Lots of sanding, filling with epoxy and Starbond CA the polishing with "Food Grade" Kustom Grit Step#1.
Kustom Grit Superfine Abrasive Paste | Kustom Creations
They came up okay and should do good.
Cheers Peter
aaDSC02159.jpg aaDSC02160.jpg
aaDSC02162.jpgaaDSC02161.jpg
aaDSC02164.jpgaaDSC02163.jpg
-
15th March 2023, 12:30 PM #2
Some more photos
Some more photos of preparation and pre-polishing..
aaIMG_2007.jpgaaIMG_2004.jpg
aaIMG_2006.jpgaaIMG_2005.jpg
aaIMG_1998.jpgaaIMG_1997.jpg
aaIMG_1996.jpgaaIMG_1995.jpg
-
15th March 2023, 02:56 PM #3Senior Member
- Join Date
- Jan 2019
- Location
- Christchurch New Zealand
- Age
- 81
- Posts
- 278
Great looking boards you have been busy your operation must have worked.
-
16th March 2023, 03:17 AM #4