Thanks: 6
Likes: 5
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: How do I sharpen forstner bits?
-
16th February 2023, 07:17 PM #1
How do I sharpen forstner bits?
This things as blunt as a foot to the face, how should I go about sharpening it?:
IMG_9130.jpg IMG_9131.jpg
They're Freud so pretty good quality.
-
16th February 2023, 07:44 PM #2Intermediate Member
- Join Date
- Feb 2021
- Location
- Tasmania
- Age
- 65
- Posts
- 34
A file or diamond stone on the flat of the cutting edges. For my cheaper forstner bits a normal file works fine. If the steel is a bit harder, use a diamond file.
-
16th February 2023, 08:13 PM #3
-
16th February 2023, 08:20 PM #4SENIOR MEMBER
- Join Date
- Oct 2019
- Location
- Brisbane, Australia
- Age
- 44
- Posts
- 505
You are really trying to restore an edge rather than hone. There is really no purpose in trying to hone a very fine edge on a drill bit.
There are YouTube videos showing multiple methods - usually either a Dremel, diamond paddles if you have flats, or a roundle file or round hone. No-one I've seen has ever suggested you need anything other than a coarse grit.
-
17th February 2023, 03:27 AM #5
If you have ever sharpened or touched up the teeth of a backsaw, you will understand when I say that you need to imagine that the forstner bit is much the same. I use 240-, then 600 grit diamond paddles. The aim is simply to polish the flat faces on the inside of the bit - never the outside. Count your strokes to give each face the same number. You want to keep the cutting edges level.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
17th February 2023, 08:10 AM #6
The sharpening tips are good.
One thing to consider - how did they become blunt?
Many users abuse forstener bits, well all drill bits, by operating them at very high drilling speeds, which becomes more of an issue with our Australian hardwoods and the typically high silica content of the wood.
drill-speed.pdf (carbideprocessors.com)Mobyturns
In An Instant Your Life CanChange Forever
-
17th February 2023, 08:12 AM #7New Member
- Join Date
- Jun 2021
- Location
- Melbourne
- Age
- 42
- Posts
- 6
I found this useful
great thread very helpful!
-
17th February 2023, 08:56 AM #8
-
17th February 2023, 05:31 PM #9
Sam, look up DMT dia-sharp mini hone.
I just clamp the bits into a vise and work the faces. Keep the hone flat and make sure you can feel the wire.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
17th February 2023, 05:51 PM #10
-
17th February 2023, 06:02 PM #11
Sam, have you any experience sharpening blades (chisel or planes)? It sounds not.
When one hones across the bevel face of a blade, a wire edge is created at the back of the bevel. This is an indicator that you have indeed honed the full face. If you do not achieve a fine wire, the bevel edge has not been sharpened. It is possible to polish up a bevel face with it actually remaining dull.
The edge of any blade sharpened with a hone is the same - be it forstner or knife or chisel.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
17th February 2023, 06:41 PM #12
-
21st February 2023, 03:58 PM #13
Good response, EB.
Your next priority now should be to learn to sharpen. You cannot do anything good with blunt tools, no matter how expensive. May I guide you towards researching sharpening techniques:
- Derek Cohen's website, and
- sharpening Forum on this Forum.
Probably the best (and cheapest) way to get started is with "scary sharp" method - just need a honing guide (optional, but recommended), 4 or 5 grades of sandpaper and a flat plate. The first time a "wire" appears is transformational. You are now a sharpener! Later, when you are more experienced and can make an informed decision then you can consider other options - diamond plates, water stones, CBN wheels, etc. Many, many viable options.
-
21st February 2023, 07:04 PM #14