![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: How to mark centre of 12mm hole
-
7th December 2022, 06:36 PM #1
Intermediate Member
- Join Date
- Nov 2009
- Location
- Rockhampton
- Posts
- 5
How to mark centre of 12mm hole
Well I know it's a basicly a horrible description. But I have 12mm holes and I need to line this up mm perfect and mark another piece before drilling it out.
Any ideas.
-
7th December 2022, 06:49 PM #2
depending what your holes are already in, use a cover plate.
as in if holes are on flat timber, tape a thin piece ply over both holes and mark out on it.I would love to grow my own food, but I can not find bacon seeds
-
7th December 2022, 10:01 PM #3
The easiest method to transfer dowel positions is to use "dowel markers" or "dowel marking points."
Haron have 6, 8 & 10mm - Centre points Archives - Haron
but I'm sure if you search around you will find 12mm versions on the 'net.Mobyturns
In An Instant Your Life CanChange Forever
-
9th December 2022, 01:50 PM #4
8pcs Dowel Centre Point Pin Set 6/8/10/12mm Dowel Tenon Center Set Transfer AU | eBay
12mm centre points for marking here on the above link.Johnno
Everyone has a photographic memory, some just don't have film.
-
9th December 2022, 09:25 PM #5
If you have one to hand, a 12mm forstner bit will do in a pinch... provided they're not stopped holes.
- Andy Mc