G'Day from Mid North Coast NSW

[Bazzwaldo]

Long time lurker, first time poster
I have a few items I'm looking to sell but not sure how to go about it
The gear I have just doesn’t get the use it deserves but I'm not sure of its value or whether to sell them individually or as one lot?

The equipment is as follows:

JET Cabinet Saw JWCS-10
JET Woodworking Bandsaw JWBS-18
JET Thicknesser (Planer) JWP-15HO
JET Shaper (Edge Bander) JWS-18HO
JET Dust Collector DC-1200
*All JET Machinery is 240v and come with workshop manuals
Hafco 2 Hp disc sanding Linishing wheel (2003)
Dewalt 305 sliding compound saw with saw stand (2000’s model)

Any advice greatly appreciated before I list them on this or any other site recommended

[barramonday]

Hi Bazz, No idea on the value of your things, but I'd definitely list them individually as most folks (unless just starting out) wouldn't want all the machines.

[Bazzwaldo]

Hi Barra
I had a teacher called Barry Monday and as it turns out, he taught Aquaculture so the name was quite fitting
Thanks for your input, it makes sense
Cheers

[Scribbly Gum]

Where are you on the mid north coast?
There are plenty of woodworking groups and men's sheds hereabouts who might be interested as well
Tom

[Bazzwaldo]

Hi Scribbly
I'm in South West Rocks, I think there's a Mens Shed in Kempsey, I'll check them out
Cheers

[cava]

Hi Scribbly
I'm in South West Rocks, I think there's a Mens Shed in Kempsey, I'll check them out
Cheers

Been to the Kempsey shed, and to be honest, there is better.
Parents lived in Crescent Head 40+ years.

[Scribbly Gum]

Hi Scribbly
I'm in South West Rocks, I think there's a Mens Shed in Kempsey, I'll check them out
Cheers

Yep, and also one in Wauchope, one in Port Macquarie, one at Kendall and one at Laurieton.
Also there is/was a sheila's shed at Kempsey as well
Cheers
Tom

[Hodgo]

I could be interested in the cabinet saw

I'm just down the road in Old Bar

cheers
Hodgo

[Bazzwaldo]

Hi Hodgo,
I reckon the cabinet saw will be the most sought after of all my machinery and its a toss up between the edge bander the linisher as the least
I'll post some pictures later along with motor size
Cheers

[Uncle Al]

As the real estate people say, it is all about the location.

I got a bit excited about the tablesaw in Sydney, but now find that you are up the coast a fair way from the big smoke.
Changing your location will prevent a lot of confusion in the future.
Good luck with the sale, all items should be easy enough to find a new home.

Alan...

[old1955]

Welcome to posting.

[crowie]

G'Day & Welcome to a top forum "Bazza".
There are good few member on the mid-north coast with a stack members in and around Sydney, across NSW plus the rest of Australia and the world.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum......
Enjoy your woodwork......
Cheers crowie

PS - On the sale question:
Photos and good description in market place....

[Scally]

Welcome to a good part of the world Bazza.
I'd like the sound of your bandsaw.

We have a very good Men's Shed at Coffs Harbour too.

[verawood]

Welcome to the forum