Results 1 to 4 of 4
Thread: mirotone
-
21st November 2005, 10:48 PM #1
New Member
- Join Date
- Nov 2005
- Location
- Melbourne, Victoria
- Age
- 45
- Posts
- 1
mirotone
:confused: Hi all
i have been using miratone and seem to be getting bubbles when spraying veneer board why is this and how can i prevent it
-
21st November 2005, 11:01 PM #2
......say what?
- Join Date
- Feb 2005
- Location
- Melbourne, Australia
- Age
- 47
- Posts
- 0
Hi, others may be of more help, but heres my guess anyhoo. Is it possible you are flooding the veneer too much at once on the first coat, and any air in the pores become trapped, resulting in the bubbles?......shane?..:confused:
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
22nd November 2005, 05:14 PM #3
SENIOR MEMBER
- Join Date
- Feb 2003
- Location
- Garvoc VIC AUSTRALIA
- Posts
- 3,208
If you are using sanding sealer let it dry overnight before you topcoat or you can get tiny bubbles.
If you'r not using sealer, dunno.
-
23rd November 2005, 11:18 AM #4
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
fairly common nowadays when finishing veneer. Air trapped in the pores of the veneer and also gas escaping from adhesive etc. Just use a light coat for the initial application and let it dry. Sand well, without sanding through the veneer! and coat as normal. Its not a 'mirotone' problem i've used it when spraying seal coats of shellac.
Cheers
Reply With Quote
Similar Threads
-
Mirrotone
By sandyw in forum FINISHINGReplies: 2Last Post: 21st March 2005, 09:51 PM -
Cut & polish lacquer
By JB in forum FINISHINGReplies: 6Last Post: 10th December 2004, 09:31 AM
Bookmarks