Thanks Thanks:  3
Likes Likes:  7
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  6
Results 1 to 3 of 3
  1. 7th June 2022, 05:59 PM #1
    crowie's Avatar
    crowie
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    9,060

    Default Toymakers Mallet

    Toymakers Mallet for @kustomcreations_byscott “Make a Mallet Challenge”.


    I have to thank Mark @dainermade for his encouragement to have a go!


    Home | Dainer Design


    Making toys I don’t need a big or heavy mallet.


    I’d been using an old plumbers mallet for years, but with the challenge I made this one to a similar scale.




    I’ve used my own Iron Bark with a laminated Gidgee faces and a Walnut handle.


    Kustom Grit step #1 was used to finish it. #kustomgritmalletchallenge


    Wood Finishing Products | Kustom Creations

    Cheers crowie
    390E529A-1282-41A1-B824-AE118C26EC92.jpg
    E5B61457-D443-4881-A559-0683916347E6.jpg
    903177FA-A6FF-42C8-B277-77B34F2C5784.jpg
    CFEEBADC-8D2D-4B32-BB73-9703D08857E2.jpg
    71B6E025-40C2-4F0C-A307-BA087B572510.jpg
    329FEE2F-021F-41E3-A2DE-28BFD55FA91E.jpg
    2D88C0F0-A6AC-43E8-A3E4-F385A4B3E969.jpg
    3316E65F-BD0A-4A33-81E6-85454D5294B2.jpg
    Reply With Quote Reply With Quote
  2. 7th June 2022, 06:37 PM #2
    Peter White
    Peter White is offline Senior Member
    Join Date
    Jan 2019
    Location
    Christchurch New Zealand
    Age
    81
    Posts
    278

    Default

    A very good looking mallet and well made as well, a man of many talents.
    Reply With Quote Reply With Quote
  3. 7th June 2022, 08:51 PM #3
    crowie's Avatar
    crowie
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    9,060

    Default

    Just to clarify why the unusual shape of the mallet!
    The smaller end at 3/4” (20mm) square is to help tap axle pegs in place.
    Cheers Peter
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules