Results 1 to 3 of 3
  1. #1
    Join Date
    May 2018
    Location
    Hunter Valley
    Age
    67
    Posts
    0

    Default Drum sander roll dimensions.

    G’day all, I have recently obtained a Carbatec drum sander (WDS 4080P).
    The machine doesn’t have a roll installed that I can copy and cut.
    I have a new 25m roll of paper but I’m unable to find a template or measurements of the correct end angles to cut. Dimensions or links very much appreciated. Thanks..
    Matt


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Aug 2004
    Location
    Perth WA
    Posts
    355

    Default

    Then go to Carbatec and buy a pre-cut sanding wrap for drum sanders (76.2mm X 2305MM) which is as per their web site
    Experienced in removing the tree from the furniture

  3. #3
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    510

    Default

    I have the same machine. If you cut a long strip of ordinary paper the same width as the roll of sandpaper you have already purchased you can roll that onto the machine and the cutting angles for the ends will be self evident and the length wil be correct.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •