Results 1 to 3 of 3
Thread: Cut and emboss
-
20th April 2022, 06:47 PM #1
SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 133
Cut and emboss
G'day
I know some of you have partners interested in various crafts.
My wife has been gifted with a 'spellbinders grand calibur' embossing machine. Unfortunately it is missing the cutting mats and plates.
Just wondering if anyone may have one or know of one in captivity who could measure the thickness of each plate. I believe they are probably polypropylene, with one a thin rubber.
(the machine is red, and the plates are about a4 size)
Thanks
Russ
-
20th April 2022, 08:27 PM #2
GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 85
- Posts
- 632
Google could be your friend as there appeared to be replacement plates available when I looked to see if the machine is similar to one that my wife has for card-making.
Tom
"It's good enough" is low aim
-
20th April 2022, 09:10 PM #3
SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 133
This particular machine is relative old, and while there are one or two, the baseplate in particular is not available in aus.
Im sure that something can be substituted, if i can find the correct thickness.
I can probably also work it out by trial and error.
Reply With Quote
Bookmarks