![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Old gearbox tumbler gears
-
24th January 2022, 09:50 PM #1
Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
Old gearbox tumbler gears
Hi all
I am chasing old 9" and/or 260 gearbox tumbler gears, I am making some up for the 260 Imperial gearbox P/No 5H552 as they are a 36 tooth gear and the standard metric tumbler gears are 38 and only a thin gear. I am using a length of pre cut gear to make these and there are none available from Mal and seems a waste to throw out the old gears when they could be reused/recycled for another purpose.
If anyone has recently rebuilt their gearbox and have replaced these gears and still have the old gears could you please get in contact with me.
I know it should be in the wanted section but it is Hercus specific and not everyone looks through the wanted section all the time (or is that just me?)
Regards
Steve
Attached Images
-
IMG_1162.jpg (184.8 KB)
-
IMG_1163.jpg (199.6 KB)
-
IMG_1164.jpg (114.4 KB)
Read the full thread at metalworkforums.com...