Results 31 to 34 of 34
-
18th January 2022, 06:31 PM #31SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 48
Before I bought the sander I have, I almost bought/but missed out a new ish second hand SCM edge sander for 4k, didnt want to spend too much on the sander as it only sands and I dont need 0.0001m accuracy for my sanding job so went with the cheapest option, its an interim solution.
If I see a second hand SCM sander I will definitely take it - am still waiting.SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
18th January 2022, 06:57 PM #32Senior Member
- Join Date
- Aug 2016
- Location
- Hervey Bay
- Age
- 46
- Posts
- 10
The Hammer HS950 unit seems to review well, I've no experience with it but should be a good step up from the Woodman without being 8k I'm guessing 3-4.
-
18th January 2022, 06:59 PM #33Senior Member
- Join Date
- Apr 2020
- Location
- Seaford, Vic
- Posts
- 21
Another strategy might be to determine your needs - what do you want the sander for? How accurate do you need it to be? Will a Chinese machine do? If so then research which of the Chinese machines offer the best quality. Seems like the Woodman isn't the best of the Chinese machines, Scheppach might be reasonable, the Sherwood is likely reasonable too - will post a review once mine arrives-ordered it today.
-
18th January 2022, 07:47 PM #34GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 185
agree 100%, buying quality if somewhat expensive gear is an investment mostly because there is high demand for second hand quality machines, you can often recoup almost all of your initial outlay, any depreciation is usually well below what a cheap machine, or several, would have cost and then depreciated.
granted, some particular machines are not common, either because they are still in use or get snapped up instantly, however, many woodworking machines are being replaced with modern CNC equipment, and therefore there is a glut of them (panel saws for example), and the value of those is way below replacement and initial cost, but because businesses need the space, and have usually fully written off any depreciation, they will let machines go at a low price.
The other reason you’ll find it difficult to find good secondhand Timber working machines like sanders, spindles, bandsaws, and planers, is because the work that they do is becoming rarer here, everything is cut from sheets of manufactured board, assembled by low paid workers, snd thrown into a container and out. A lot of these timber machines have been scrapped or are sitting in dealers warehouses, many of them have been shipped to second world nations like Indonesia and India, where they are still in use, churning out replication furniture and the like.
A mate of mine took the entire contents of his big woodshop over to Indonesia and set it up there, limitless labour, cheap, he employs an entire village and he lives like a king. There’s a few guys like him over there.
Bookmarks