Thanks: 0
Likes: 4
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
7th January 2022, 02:57 AM #1
New Members
- Join Date
- Jan 2022
- Location
- New York, USA
- Posts
- 2
- Post Thanks / Like
New to Forum - Scale Model Castle
Hello from the U.S. Starting a new project a model castle to be constructed from wood and plastic, probably 1/32nd scale.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 , 0
crowie liked this post
-
7th January 2022, 09:15 AM #2
Bulnesia Arborea
- Join Date
- Jun 2018
- Location
- Melbourne
- Posts
- 471
- Post Thanks / Like
Welcome to the forum.
Good luck with your new project.
-
7th January 2022, 01:19 PM #3
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
- Post Thanks / Like
Welcome to the forum.
-
7th January 2022, 09:21 PM #4
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 2,576
- Post Thanks / Like
G'Day & Welcome to the Great Southern Land and to a top forum......
There are quite a few members from across the USA and the rest of the world.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Especially a top mob of blokes on the toymaking & scale modeling section of the forum.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork.....
Cheers from On Top DownUnder, crowie
PS - Please show your Model Castle in the toymaking section of the forum, thank you
-
8th January 2022, 07:11 AM #5
Senior Member
- Join Date
- Apr 2010
- Location
- NSW, but near Canberra
- Posts
- 285
- Post Thanks / Like
Welcome..
1/32nd scale, that's going to be an impressive model! If I remember correctly, the keep of Dover Castle in Kent, England is about 100 feet square and 80odd feet high, with walls up to 20feet thick. At 1/32nd scale a model of Dover Castle (just the keep!) wouldn't fit through a standard sized Australian door!!
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 , 0
-
8th January 2022, 10:57 AM #6
New Members
- Join Date
- Jan 2022
- Location
- New York, USA
- Posts
- 2
- Post Thanks / Like
I'll need to rethink scale and think about "short"cuts for sure. Dimensions may have to be malleable.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 , 0
crowie liked this post
-
8th January 2022, 10:18 PM #7
SENIOR MEMBER
- Join Date
- Jul 2004
- Location
- Adelaide
- Age
- 77
- Posts
- 425
- Post Thanks / Like
Welcome to the forum.
Regards
Keith
-
10th January 2022, 01:26 AM #8
GOLD MEMBER
- Join Date
- May 2011
- Location
- FRANCE
- Age
- 59
- Posts
- 1,893
- Post Thanks / Like
Welcome to the forum
Reply With Quote
Bookmarks