![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: Parker mid century chair screws
-
30th October 2021, 01:41 PM #1
New Member
- Join Date
- Oct 2021
- Location
- Sydney
- Posts
- 4
Parker mid century chair screws
Hi,
I'm in the process of restoring a set of Parker 1960's chairs I recently acquired and I've come across a problem replacing some missing original screws securing the chair back to the legs.
The existing original screws have an 'antique' finish and are a bit unusual. These screws are Phillips head, self-tapping countersunk with a raised/oval head [not a domed head]; measuring 3.5mm [1/8"] x 60mm [2.5"] and the head diameter is 8mm [less than 3/8"].
I can source similar sized countersunk flat head screws, but the head diameter is a bit too large for the countersink in the chair leg.
Does anyone know where I can get replacement screws; I only need 8 screw.
Hope someone out there can help me with this.
Many thanksIMG_0455.jpgIMG_0456.jpegIMG_0458.jpgIMG_0437.jpg
-
30th October 2021, 06:24 PM #2
Senior Member
- Join Date
- Jun 2012
- Location
- Dungog
- Posts
- 55
Nice chairs, I have very similar if not the same.
-
30th October 2021, 06:37 PM #3
Could one use the larger screws, put them in a drill thread-first and sand the head to size?
The finish looks a lot like "pickling". This makes the metal black with some sort of oxide.
Some of the metal guys on the forum have described this process several times.
-
31st October 2021, 07:28 AM #4
Member
- Join Date
- Aug 2017
- Location
- Sunshine Bay NSW
- Age
- 76
- Posts
- 10
I think a couple of the original Parker cabinet makers started a restoration/ repair service in western suburbs Sydney some time ago, if they are still going and you can track them down they may be able to help I will check with a friend who might have used them.
-
31st October 2021, 09:56 AM #5
New Member
- Join Date
- Oct 2021
- Location
- Sydney
- Posts
- 4
Thanks Rick47, I’ll do a search to see if I can find them. Anything your friend can provide would be appreciated
-
31st October 2021, 10:00 AM #6
New Member
- Join Date
- Oct 2021
- Location
- Sydney
- Posts
- 4
I had thought of this solution and have it as a last option. I know I’m being a bit anal, but I’d like to use original/reproduction screws, or something more similar then flat heads.
-
31st October 2021, 10:02 AM #7
New Member
- Join Date
- Oct 2021
- Location
- Sydney
- Posts
- 4
Care to donate some of your screws
-
1st November 2021, 05:57 AM #8
Member
- Join Date
- Aug 2017
- Location
- Sunshine Bay NSW
- Age
- 76
- Posts
- 10
Graham
The company is Covesmore Solutions in Seven Hills, owned by Tony Parker the son of Jack Parker owner of the original company, I haven't got contact info but you should be able to google them.
Cheers Rick
Similar Threads
-
Restore Parker Mid Century Teak table top
By magfowl in forum RESTORATIONReplies: 29Last Post: 25th June 2019, 02:49 PM -
Reassembling and refinishing mid century chair
By LotteBum in forum RESTORATIONReplies: 6Last Post: 11th April 2016, 03:36 PM -
Parker Chair Loose Seat
By tobot in forum RESTORATIONReplies: 2Last Post: 26th April 2012, 12:10 AM