![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
25th October 2021, 03:38 PM #1
New Member
- Join Date
- Oct 2021
- Location
- Perth
- Posts
- 1
Robland X31 - Can this run single phase or VFD required
Hi All,
On a learning curve here, so please bear with me. I have the opportunity to grab a Robland X31 for free (or close to it).
As I understand, some of these (depending on motors I guess) are capable of being wired for either 3 phase or single phase.
My question is - can anyone tell if this machine can be wired as single phase (it's 3 phase currently right?).
If not, please recommend me a VFD to order - will the ecogoo 2.2kw do the trick?
IMG_20211025_090343.jpg
IMG_20211025_090456.jpg
IMG_20211025_090330.jpg
Thanks!
-
26th October 2021, 07:18 PM #2
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 24,746
You have to get at the motor connection box and take the cover off and photograph that.
Also the motor(s) nameplate may indicate this - get a photo of that.