Sunday Round Table Jabber - Sunday evening all welcome

[Simplicity]

We had a new member "Dave" and I had to show my untidy shed.

We very much enjoyed the impromptu shed tour Mr Pagie.

Dave it was good to have you even if it was silent introduction.

Cheers Matt.

[Simplicity]

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tomorrow’s hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please, its everything too do with Mallets yep Mr Aka Bushmiller is having design issues with his smashing equipment,so lets see if we can help him.
Or bring out your smashes an gives a look.




Start Time 7.30 ish
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt

[Bushmiller]

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tomorrow’s hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please, its everything too do with Mallets yep Mr Aka Bushmiller is having design issues with his smashing equipment,so lets see if we can help him.
Or bring out your smashes an gives a look.




Start Time 7.30 ish
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt

Matt

Sounds like a smashing time could be had by all.

Regards
Paul

[Simplicity]

Matt

Sounds like a smashing time could be had by all.

Regards
Paul

Paul we could pound this into some derogatory comments, but I won’t go there.
That’s way above my Lindquist bench mark.

Cheers Matt.

[doug3030]

I have some experience in this area if you want to HIT me up for some information

[Simplicity]

I have some experience in this area if you want to HIT me up for some information

O Please,

I spent 20 years getting paid to hit your cars .

Cheers Matt.

[Bushmiller]

A lively discussion on nothing particular except for Bob's rascally saw and Matt's saw handle taking the gloss of things:

The subject of beer commercials did surface and the distinct lack of JP Corona commercials: Can't think why. So for those of you who feel starved for alcoholic content have a gander at this:

Beers from the Arctic Ocean - Underwater matured beers - North & Beyond Ep. 8 - YouTube

One of a series of "adventures" north of the artic circle: This one was the conclusion of brewing beer from glacial ice and fermenting it deep in a fjord.

Regards
Paul

[Simplicity]

Sunday is nearly again the end of the Week.

That means Sunday Night Jabber is yet once again.
An for those in Melbourne a new found freedom.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Sundays night subject matter is,no idea.
I unfortunately wont be in attendance due to family matter.
So i will leave it up to the regulars to work out what they want to do.
But the Jabber,could do with some Fresh meat,for those that a thinking about joining in, we are a lively group, with a huge wealth of opinionated opinions on wealth of subjects .




Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt

[Pagie]

I'll be bringing a 50ft blackwood tree that is at about 45deg at the moment. Nice tree fairly straight and clear. It will fall in a day or two, it might hit the new deck belonging to next door. Its his tree. What about the subject tonight of free wood.

[Bushmiller]

Ummm. I'm not sure Pagie's tree will fit on my screen.

Matt

As you will not make it this evening, here is the highly sophisticated wooden handle polisher that I use:

P1070875 (Medium).JPGP1070874 (Medium).JPG

It is an automotive style car polisher that is fairly low speed. 10" diameter with a sheepskin bonnet. The relatively thick shape allows the curvy bits to be polished too with the edge. Very expensive but worth the $22.

If you think this is cheating a little, may I draw your attention to this little clip from the Disston factory. View the polish scene around the 40sec mark. It dates from 1920.

HD Stock Video Footage - Specialty saw blades being manufactured in the Disston plant at Philadelphia, Pennsylvania

I have posted this link before so it may not be a revelation to you.

Regards
Paul

[Simplicity]

[QUOTE=Bushmiller;2259658]Ummm. I'm not sure Pagie's tree will fit on my screen.

Matt

As you will not make it this evening, here is the highly sophisticated wooden handle polisher that I use:


Paul, first can I just bring your attention too the actual date today,
I’m fairly certain Australia has not been devised up that bad yet, that Queensland think there ahead of the rest of the nation!!!!.
Maybe ask Leanne for some help.

But more importantly your buffer certainly looks like a economy version.

Will check the Link out, thank you.

Cheers Matt.

[Bushmiller]

[QUOTE

Paul, first can I just bring your attention too the actual date today,
I’m fairly certain Australia has not been devised up that bad yet, that Queensland think there ahead of the rest of the nation!!!!.
Maybe ask Leanne for some help.



Cheers Matt.

Ooops: A bit ahead of myself, but I'm the only one.



Regards
Paul

[doug3030]

A good chat was had by the three of us who turned up, Paul, Pagie and me.

Highlight of he night was Pagie's "windfall" - a large Blackwood tree that came down in the recent storms. He wants to split it all up for chairmaking since it is still green.

[Simplicity]

Sunday is nearly here again the end of the Week.

That means Sunday Night Jabber is yet once again tomorrow night.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tomorrow’s night hot topic,
Bring out the knives, or more specifically bring out your Marking out knives, yep i need a pep talk an should really get make some nice marking out knives.


Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt

[Oldgreybeard]

Seeing that it is our 57 wedding anniversary today, I think it would be a wise move to spend the time with my wife and family
Bob