![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Greetings to all woodworkers.
-
23rd August 2021, 11:32 AM #1
Member
- Join Date
- Apr 2013
- Location
- Maryborough
- Posts
- 4
Greetings to all woodworkers.
About time to make a contribution. Been raised a woodworker at age twelve in 1938.Born 21 5 1926 makes me an antique 95er.Looking forward to get a card from the Queen. I do not want a card from Charly. Because there has been a War and I was on the wrong Side Live did often not go as planed. Came to Australia 1955 and now live near Maryborough North of Brisbane. I have a large well equipped Workshop all by myself. Over The Years collected g ood Quantity of rare Timber. I like to make periodic and traditional Furniture and recently interested in Barley Twist Creations. Because Nature has been somewhat rough on me I might have to pass onto someone else. Most People call me Ali some call me something Else. Happy Chipping to all of You.
-
23rd August 2021, 11:43 AM #2
GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 123
Interesting table, Ali. How was the top made - is it epoxy?
Thanks for sharing.
Regards,
Brian
-
23rd August 2021, 11:46 AM #3
G'Day & Welcome to a top forum "Ali".....
There are quite a good few members across South East Queensland with a stack of members around Brisbane plus the rest of the country.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork......
Cheers crowie
-
24th August 2021, 09:57 AM #4
Senior Member
- Join Date
- Aug 2014
- Location
- Geelong, Victoria
- Posts
- 38
Good luck with your aim to get a card from HRH (the queen). Most of us probably have to wait a while longer than you for that. As a staunch republican I am hoping to hear from an Aussie head of state rather than some aristocratic head of a country that deported many of my ancestors.
I like your barley twist work and from your follow-up thread it looks like you are just a tiny bit obsessed with barley twists at present. I hope I can still be obsessed by a new technique when I am 95.
Keep i5 up and keep us posted on your new projects.
Bruce
-
26th August 2021, 04:12 PM #5
Member
- Join Date
- Apr 2013
- Location
- Maryborough
- Posts
- 4
Just yo reply.
As You have assumed the top is Epoxy. Considering I am rather new to casting it worked out satisfactory. Cheers.
-
26th August 2021, 04:34 PM #6
Member
- Join Date
- Apr 2013
- Location
- Maryborough
- Posts
- 4
I always try.
If I created the Impression being a twisted woodworker that is not so. I am rather more interested in carving and replica work. Also creating some unusual Cases. cheers to You.
-
30th August 2021, 03:24 AM #7
Welcome to a forum
Similar Threads
-
Hello Woodworkers
By alanburton1960 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 9Last Post: 11th March 2019, 06:41 PM -
G'day woodworkers
By madwilson in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 9Last Post: 24th September 2009, 02:27 PM -
Woodworkers do it with..........
By LineLefty in forum JOKESReplies: 35Last Post: 2nd June 2004, 11:25 PM