Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2006
    Location
    United States Of America
    Posts
    2

    Default Thread detective. Thread identification tools.

    Restoring and tool modification is an enjoyable hobby of mine.
    Just for fun I tried them on my Woodriver No 3 bench plane. Also my Record 077 bullnose plane.
    The habit of removing screws before throwing something in the trash can resulted in a large number of unknown fastener sizes.
    I went to hardware store looking at specialty fasteners and machines screws.
    I noticed the thread detective product and purchased both the large SAE and Metric sizes.
    Very happy and pleased with the ease of use.
    It makes identifying the Mini or smaller machine screws easier. My vision isn't that great even with bi-focal glasses.
    I drove to a different store to purchase the Mini SAE and METRIC sizes at a different store.
    The only minor inconvenience is them being on the small cable.
    The cable will keep me from losing them. The cable also works with my belt carabiner clip for keys.
    They weren't inexpensive or too expensive.
    Here in the United States 🇺🇸 each individual set costs approximately $21.99 USD depending the retail store.
    My 4 piece kit cost me $95.00 USD with tax.

  2. #2
    Join Date
    Aug 2008
    Location
    Tennant Creek, Aust
    Age
    62
    Posts
    1

    Default

    Hi @woodhog, that is something I need very badly.
    What is the name of the place you bought the from?

    Ratty 05/2004 -05/07/2010 COOPER 01/08/1998-31/01/2012

  3. #3
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    332

    Default

    Although not applicable for woodhog, I noticed Bunnings have a similar thing mounted on the shelves where the nuts and bolts are. I was in there on Saturday looking for Nyloc nuts for some small machine screws I found in my random bits box. I wasn't 100% certain what the size was and the nuts are in a blister pack so no way to check without opening a pack. I spied the thread checkers, confirmed the size and bought only the correct size nuts. I've never noticed the thread checkers before but I presume they have been there all along.
    Heres a similar thing from China
    Thread Tester Checkin Checker 26 Specifications [Inch & Metric] Nut Bolt Screw w | eBay
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  4. #4
    Join Date
    Jun 2000
    Location
    Western Australia
    Age
    78
    Posts
    122

    Default

    I have imperial & Metric thread gauges with Tap & Die sets not as easy to use without my specs ,these thread testers are perhaps a better option as ones sight needs more assistance.
    Johnno

    Everyone has a photographic memory, some just don't have film.

  5. #5
    Join Date
    Jan 2006
    Location
    United States Of America
    Posts
    2

    Default

    What is the name of the place you bought the from?
    Here in the USA Menards, Woodcraft & Amazon sell them.
    I'll eventually get a Mitutoyo 950-253, Screw Pitch Gage, 4 - 84 TPI, 51 Leaves as well.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •