Results 1 to 11 of 11
  1. #1
    Join Date
    May 2009
    Location
    Sydney Australia
    Age
    71
    Posts
    0

    Default Where to buy spray laquer

    Hi all, first time poster to this forum. A few years back, I purchased 4lts of Sherwood Duralc 15% gloss spray lacquer from a Sherwoods distributor out near Eastern Creek in western Sydney
    Unfortunately, they went out of business and I have been trying to find a similar product to use on hardwood table tops, etc. I had great results using the Sherwood product.
    What are the masses using these days? And where do ya get it in Sydney?
    Thanks all in advance. Billy
    Attached Images Attached Images
    I'm not young enough to know it all.

  2. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

  3. #3
    Join Date
    Aug 2012
    Location
    Imbil
    Posts
    0

    Default

    +1 for Mirotone I have used it for many years and always happy with the products.
    Regards Rod.
    Rod Gilbert.

  4. #4
    Join Date
    May 2009
    Location
    Sydney Australia
    Age
    71
    Posts
    0

    Default

    Great stuff. Thank you.
    I'm not young enough to know it all.

  5. #5
    Join Date
    Dec 2012
    Location
    Australia
    Posts
    60

    Default

    22croma.com.au are Sherwin Williams Distributors here in Aus. I'm hoping to try Mirotone soon. Just found a local distributor. Best of all, it's Aussie made I believe.

  6. #6
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default

    I use Wattyl Stylwood, with Wattyl Rediseal as a sealer, though I think precats are all pretty similar.

    I use Wattyl products because I found them best when negotiating discounts.
    Apologies for unnoticed autocomplete errors.

  7. #7
    Join Date
    May 2012
    Location
    Brisbane (Chermside)
    Age
    71
    Posts
    0

    Default N C Lacquer supplier in Brisbane

    Picked up some sanding sealer yesterday, only to discover the PPG product I used to get has been replaced by a much more expensive product ... about $250 for a 20 litre drum. Sharp intake of breath.

    Now looking for a supplier of lacquer, sanding sealer and thinners (in 20 litre drums) in Brisbane. Can anybody help? My searches have found only the Mirotone warehouse at Wacol, but the only way to contact them is through the Sydney office, or the local rep (when he answers his phone). It's not possible to rock up to the warehouse and buy product.

  8. #8
    Join Date
    Feb 2014
    Location
    Bne
    Posts
    35

    Default

    Croma coatings, Yatala

  9. #9
    Join Date
    May 2012
    Location
    Brisbane (Chermside)
    Age
    71
    Posts
    0

    Default

    Quote Originally Posted by tomartomau View Post
    Croma coatings, Yatala
    Thanks, tomartomau. I'll check them out. I'll need a cut lunch and a compass to get there, but if they've got the right product at a decent price, it'll be well worth while.

  10. #10
    Join Date
    Feb 2014
    Location
    Bne
    Posts
    35

    Default

    I use the pre cat and sanding sealer and spray through a stage 5 hvlp.
    I think the brand is Shermin Williams

  11. #11
    Join Date
    May 2012
    Location
    Brisbane (Chermside)
    Age
    71
    Posts
    0

    Default

    Mirotone just quoted me about $198 for a drum of lacquer compared to my old suppliers price of $250. I have used Mirotone's products in the past and been happy with them.

    22Chroma quoted $152 per drum of lacquer, but it is a 40 minute one way drive to Yatala, and the Mirotone rep will deliver.

    Progress is being made. My heart skipped a beat when my current supplier quoted me $250 for lacquer. So, the question is am I prepared to pay $46 to have the Mirotone product delivered and save over an hour and a half travelling to Yatala. I think this is likely, because the Mirotone product is a higher build product.

Similar Threads

  1. Hardener for Laquer?
    By rfeyer in forum FINISHING
    Replies: 2
    Last Post: 4th October 2011, 05:46 PM
  2. acrylic laquer
    By big chisel in forum FINISHING
    Replies: 4
    Last Post: 25th June 2011, 08:32 PM
  3. What Laquer should I use
    By Dannys in forum FINISHING
    Replies: 3
    Last Post: 24th November 2010, 12:41 AM
  4. A buisness to laquer
    By wakesetter in forum FINISHING
    Replies: 2
    Last Post: 2nd July 2009, 05:42 PM
  5. Laquer over shellac????
    By gregster in forum FINISHING
    Replies: 5
    Last Post: 26th March 2004, 06:27 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •