Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default I’m pretty P....... off about this “Saws”

    So I was going to make another saw actually I could have made a couple “But”

    Well literally this was out of my hands I had zero control on me not being able to for fill this deep desire to make another saw or three.

    So it was around 7 January, I was enjoying some well earned time in the Steel palace,possibly playing on my phone one night while the lovely Sally was watching TV,
    I’m a serial Internet screen shopping browser guy,so I would have probably given Sally a innocent smile, then done the big index finger on the buy button trick while she is watching TV.
    Knowing full well that Sally has know idea of my devious plan for world domination through the power of “SAW”.

    Un till she sees the bank accounts later, while doing our banking, for which my plan and fool proof response is “O Ye I forgot to tell you about that, must have slipped my mind darling”


    Sometimes the punishment is less than the crime .

    So I’m eagerly following my purchase an it’s route travailing the globe wondering if it’s excited to be involved in world domination!,
    Thank you Amazon!!



    So my beautiful precious all mine package is in the land of OZ some time around the 22 of January,
    I’m starting to get jittery like a dogie politician waiting in there office late one night to count the contents of a brown paper bag.

    Immmmm I can just smell that fresh new steel immmm.

    Then it goes seriously pear shap, an I revert back to using four letter words my father would make me look up in a huge dictionary.

    Wednesday 27 of January my loverly Sally is back in Melbourne as I am, I’m out working Sal is in the office and can easily hear the Door bell ring.
    It’s on the outside of said office wall, even I can bloody hear it.

    But on Wednesday 27 of January it didn’t ring the bell !!

    Then this arrives in my email


    So ok I try contacting “Fastway”
    No phone number a re direction to another company errrrrrrrrrrrrrrrrrrrrerrr.

    I google Fastway reviews Omg They seem to be the most hated Company on Earth not one good review!! .

    Emails sent panic stations armed.
    I sent polite emails no harsh words or terms.

    Check emails around the clock every 30 seconds, nothing.

    Waiting for takeaway tonight, check emails nothing
    Check Amazon “Your orders”


    I get this



    Bloody hell it seems it was right out side the front door in Melbourne,now I can’t have my new toys.
    It wasn’t a dangerous good,it would not have been heavy,I had my people listing for the door bell,(thank you Sally)
    There is no human killing dog on the property that hates courier drivers.

    There is no people to call an ask
    Just bloody computer generated emails.
    So now I will wait for my money to be returned, than bloody try again.
    Rant over


    Matt

  2. #2
    Join Date
    Feb 2015
    Location
    Hobart
    Age
    78
    Posts
    190

    Default

    I would be too...Commiserations

    Cheers,
    Yvan

  3. #3
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    Matt

    i sympathise. I am waiting on a parcel from France ( no, not a letter ) which was dispatched on 24 November and has not been heard of since. Saw blade material makes the hurt even worse!

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  4. #4
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    This evening in Glen Waverley at sunset there will be a lone middle aged guy a little chubby having a silent quite tear, for the fallen an lost saw plate.

    Cheers Matt.
    I’m still P.......

  5. #5
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183

    Default

    You have an overemotional attachment to these sawplates dude.

    People might think its a euphemism given the description in your first image....

  6. #6
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by woodPixel View Post
    You have an overemotional attachment to these sawplates dude.

    People might think its a euphemism given the description in your first image....
    My entire family would possibly agree with you

    Cheers Matt.

  7. #7
    Join Date
    May 2020
    Location
    Melbourne
    Posts
    11

    Default

    Hey Simplicity,

    You should try

    Dawborn Steels Trading Pty Ltd
    54-84 Boundary Road (PO Box 550), Braeside Vic 3195

    They sell SAE1074 H&T and I picked up a 300mm x 1500mm piece of 0.7mm piece sheet for arond $150

    They stock all different thicknesses

    Save you the hassle of having it shipped around the world. Or not even shipped at all

    Cheers,

    Bernard

  8. #8
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by Bernard Zhang View Post
    Hey Simplicity,

    You should try

    Dawborn Steels Trading Pty Ltd
    54-84 Boundary Road (PO Box 550), Braeside Vic 3195

    They sell SAE1074 H&T and I picked up a 300mm x 1500mm piece of 0.7mm piece sheet for arond $150

    They stock all different thicknesses

    Save you the hassle of having it shipped around the world. Or not even shipped at all

    Cheers,

    Bernard
    Hi Bernard,

    My basic understanding is 1075 is softer than 1095
    Steel.
    1095(high carbon) is preferable because of its edge retention.

    Cheers Matt.

  9. #9
    Join Date
    Jul 2011
    Location
    In between houses
    Posts
    185

    Default

    None available locally?

  10. #10
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    It is difficult to source steel in Australia that is of a suitable thickness for saw making. Back saws are in the typical range .020" - .029": Hand saws are from.025" up to .036" depending on length of saw. 1mm thick is the equivalent of .040". This is a quick guide to the three common steels used for saw making with 1095 being the preferred metal. The last two digits reflect the carbon content which will be a range. So 1095 implies a carbon content of approximately 0.95%.

    1075:

    AISI 1075 Carbon Steel (UNS G10750) (azom.com)

    1085:

    1085 Carbon Steel Review - Is 1085 steel good for knives? - Knife User

    1095:

    SAE AISI 1095 Steel, High Carbon Steel Heat Treat, Properties & Hardness (theworldmaterial.com)

    1075 is frequently referred to as a beginners material: This is primarily for knife making possibly because it is easier to work and more forgiving when heat treating and tempering. To be considered high carbon steel there has to be a minimum content of 0.5% carbon. However that is far too low for the purpose of making saws.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  11. #11
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by riverbuilder View Post
    None available locally?
    None that I’ve found, in hobby quantities!, that’s not to say it not available, it’s just I haven’t found any local yet.

    But the real think that P.... me off was it had actually made it 95 percent into my hands, then for no reason I have know idea why it’s being sent back.

    Cheers Matt.

  12. #12
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183

    Default

    Simplicity, did you email Amazon and talk to a human?

  13. #13
    Join Date
    Nov 2020
    Location
    Qld
    Age
    61
    Posts
    31

    Default

    Quote Originally Posted by Simplicity View Post

    But the real think that P.... me off was it had actually made it 95 percent into my hands, then for no reason I have know idea why it’s being sent back.o

    Cheers Matt.
    That would do my head in
    Kudos for your great patience sir
    Best of fortune tracking your goods down
    Mr Fiddleback

  14. #14
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    An update on all this,

    I re ordered some more 1095 Spring Steel through Amazon on 11th of February, and it arrived today.

    Exactly the same order as the previous order and I’m very happy with that.

    But, now regarding the first order,well we went back through the bank details, regarding the first order.

    And low and behold the first order, funds were never actually removed from my account, ($70.11)

    So ,it seems they had a ....... mistake sent them halfway around the globe, then realised an issue, I think.

    Short story, I’m happy.

    Cheers Matt.

  15. #15
    Join Date
    Sep 2012
    Location
    Coffs Harbour
    Posts
    29

    Default

    good to hear it arrived, the question is would you order it from there again?

    how do you personally attack that material to cut to the size of the blade you require? find that hacksaw works or something like a small dremel bit can cut it noting to keep heat away etc to not warp the edge

    Cheers,
    Nathan

Similar Threads

  1. pretty pussy
    By Christopha in forum JOKES
    Replies: 1
    Last Post: 15th November 2003, 04:53 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •