Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17

Thread: Shed Lighting

  1. #16
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by Chris Parks View Post
    Put one LED panel over the electronics bench and it will replace all those.
    I seriously doubt it.
    The actual illuminance is a combination of the "distance" and the "Lumenbs"
    One LED panel is ~4000 lumens.
    The spots are more than 10,000 lumens and are all within 0.4m^2 and 0.6m of the work surface.
    To compete with the light output of the spots 2.5 panels would be needed AND would need to be closer than 0.6 m to provide the same illuminance.
    This means they would just be in the way.

  2. #17
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    126

    Default

    Rather than getting your sparky to hard wire the lighting may I suggest that each light goes to a socket. You will want to add to and rearrange the lighting at some stage and sockets give you maximum flexibility.

    Bob calculated that you might need 14 light units. Perhaps you could get 10 double sockets, and plug in the 14 lights leaving 6 vacant sockets (temporarily vacant!). Those sockets could be wired in two batches of 10 with 2 switches, so you can have all or half your lights on.

    If you think the number of lights is excessive, just walk into your nearest supermarket and look at how many lights they have.

Similar Threads

  1. Cheap shed lighting (WA)
    By BobL in forum LIGHTING
    Replies: 0
    Last Post: 29th June 2016, 09:31 PM
  2. Lighting requirements for 6m x 7.2m shed
    By Ashes in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 2
    Last Post: 11th February 2008, 09:48 AM
  3. What lighting for new shed???
    By bloggs1968 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 8
    Last Post: 16th June 2007, 06:47 PM
  4. Shed Lighting
    By Simmering in forum LIGHTING
    Replies: 53
    Last Post: 7th July 2005, 08:59 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •