Results 1 to 11 of 11
Thread: Hi all
-
26th September 2020, 10:51 AM #1
New Member
- Join Date
- Sep 2020
- Location
- Melbourne
- Age
- 38
- Posts
- 3
Hi all
Hi everyone im new to the forum found the forum on my extensive search for someone who can set up a procam cnc machine and found a few threads in here with people having similar issues.
If anyone is in Melbourne Australia and has set up a procam machine through centroid controller and is willing to help me please that would be appreciated it.
Not too concerned about all the functions just need help setting up all the tools offsets and the 0 points for all axis and making sure the machine knows the height of the sacrificial board etc.
I use cabmaster and eazy nest it has all the tools stored in that software its just centroid giving me issues as i dont know how to use it to set up the machine properly.
If anyone could help please let me know willing to pay for someone to come out and set it up.
Thank You
Chris Mavrikios
-
26th September 2020, 03:26 PM #2
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Chris I’m sure someone will be along to give you a hand.
Ross
-
27th September 2020, 09:23 AM #3
Bulnesia Arborea
- Join Date
- Jun 2018
- Location
- Melbourne
- Posts
- 471
Welcome, I'll do you a BIG favour and stay away from your cnc.
-
28th September 2020, 09:17 AM #4
New Member
- Join Date
- Sep 2020
- Location
- Melbourne
- Age
- 38
- Posts
- 3
At this point ill accept any help i can get haha
Originally Posted by verawood
Welcome, I'll do you a BIG favour and stay away from your cnc.
-
28th September 2020, 10:51 AM #5
GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 408
Welcome.
-
28th September 2020, 06:26 PM #6
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 2,576
G'Day & Welcome to a top forum "Chris"....
There are a stack members around Melbourne and cross Victoria plus the rest of the country.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork.....
Cheers crowie
PS - Watch out for local Melbourne get togethers, great way to meet like minded forum members & network; once the lockdown has finished of course...
AND on your CNC Question, start a new thread in at least the general section to gain a wider audience and thus the possibility of more appropriate answers...
-
29th September 2020, 12:13 AM #7
SENIOR MEMBER
- Join Date
- Jul 2004
- Location
- Adelaide
- Age
- 76
- Posts
- 425
Welcome to the forum.
Regards
Keith
-
3rd October 2020, 07:25 AM #8
GOLD MEMBER
- Join Date
- May 2011
- Location
- FRANCE
- Age
- 59
- Posts
- 1,892
Welcome to the forum
-
10th October 2020, 08:34 AM #9
On a journey
- Join Date
- Oct 2008
- Location
- Leopold, Victoria
- Age
- 66
- Posts
- 1
Welcome to the forum Chris. You might get some better response to your problem by posting it here where you have a targeted audience.
Dallas
-
12th October 2020, 08:46 AM #10
New Member
- Join Date
- Sep 2020
- Location
- Melbourne
- Age
- 38
- Posts
- 3
Thank You will try that
-
14th April 2022, 01:25 PM #11
Intermediate Member
- Join Date
- Mar 2014
- Location
- Australia
- Posts
- 1
chris DM me if you still nee help im familiar with these machines
Reply With Quote
Bookmarks