Thanks: 0
Likes: 2
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Scheppach Plana 3.0
-
18th January 2018, 09:05 AM #1Intermediate Member
- Join Date
- Mar 2015
- Location
- Samford Valley
- Posts
- 42
Scheppach Plana 3.0
Scheppach Plana 3.0 , 10inch Jointer / Thicknesser. Purchased 3 years ago from H&F Sydney, has had light continual work since. Selling due to upgrade. Those of you who have read my review of this machine will note its effectiveness as a hobbyists/part time user machine. The few issue I have found with it have been fixed & upgraded, (heavy duty 90 degree uni joint on the table raise/lower mechanism). Serviced regularly. Comes with 3 sets of blades. Pick Up from Samford Valley, QLD.
$1500.
Ross
IMG_7784.jpg IMG_6589.jpg IMG_2816.jpg
-
19th May 2020, 07:06 AM #2New Member
- Join Date
- Jul 2008
- Location
- Perth
- Posts
- 7
Hi Is this still forsale
-
20th May 2020, 05:23 PM #3Intermediate Member
- Join Date
- Mar 2015
- Location
- Samford Valley
- Posts
- 42
I had genuinely forgotten about this ad. It's not for sale, ( I use it for the jointer, but am on the lookout for an upgrade) so it be if you're interested, your profile says Perth, I would assume the cost of delivery would be quite high.
-
20th May 2020, 07:27 PM #4New Member
- Join Date
- Jul 2008
- Location
- Perth
- Posts
- 7
No Problem I got one yesterday I'm in Bris will change profile
-
29th July 2020, 01:22 PM #5Intermediate Member
- Join Date
- Mar 2015
- Location
- Samford Valley
- Posts
- 42
I'll Bump this thread back up, I've recently upgraded my machinery and this is no longer needed. Has been looked after, serviced regularly, dusty attached for its whole life. Has three sets of blades and a bunch of spare sprockets for the thicknesses drive. 15amp, I can help load at this end, but would be much easier to load onto a trailer.
Asking $1100.