Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    75
    Posts
    496

    Default stainless connector

    hunting down stainless pipe/tube connectors similar to ploy irrigation tube connectors. but hopefully would like to drill small hole in tube add a grub nut into connector, I need T * L pieces 19 or 25mm

    point me in the right direction please
    I would love to grow my own food, but I can not find bacon seeds

  2. #2
    Join Date
    Jul 2008
    Location
    geelong
    Posts
    72

    Default

    Don't understand putting stainless connectors to poly tube. bit like mounting diamond on zinc for a ring.

  3. #3
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    160

    Default

    Do you mean barbed connections? If so then there’s very little in SS above 1/2” available in Australia. Dixons make SS barbed elbows and Tee splicers but only up to 1/2” in 304SS and 3/4” in brass.

    You can cobble together barbed elbows and tees by using normal female threaded pipe elbows/tees and screwing in male threaded hose barbs; but obviously this is going to start getting costly.

    What are you trying to build? There might be another way...
    Nothing succeeds like a budgie without a beak.

  4. #4
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    75
    Posts
    496

    Default

    bugga too much red wine and tiredness dont mix.

    lets try again.
    we all know what poly irrigation connectors look like. now imagine a stainless piece without Barbs that would push into stainless tube/pipe and be held together with grub screws. similar to what I have since foundTwo-way_connector_clamps_GN_131-NI_Stainless_Steel.png

    that is what I am after, now to wait until after weekend and contact Oceania Industrial Components Brisbane, I am already shaking at what the price could be....
    I would love to grow my own food, but I can not find bacon seeds

  5. #5
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Do you mean like this?

    These are 20 mm from Blackwoods
    https://www.blackwoods.com.au/hoses-...0mm/p/03302003

    $10 each - you have to register to be able to see prices.
    25mm are $15
    Screen Shot 2020-06-05 at 8.23.38 pm.png

    the size reflect the nominal size of the hose used. I would not trust a 20mm to be 20mm - I'd be measuring both the fitting and the pipe really carefully with verniers first.
    Some metal turning is likely to be needed for a snug fit to the

  6. #6
    Join Date
    Jun 2013
    Location
    Auckland
    Posts
    1

    Default

    Anything here maybe: Stainless pipe and tube fittings

  7. #7
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    75
    Posts
    496

    Default

    would love something but the $$$ comes into play, appears we can get sheet folded and riveted at a very good price, not exactly what I was after, but playing with others $$
    I would love to grow my own food, but I can not find bacon seeds

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •