Thanks: 0
Likes: 3
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Hammer A3-31 knives
-
26th May 2020, 06:04 PM #1GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Hammer A3-31 knives
Set of 3 x 500-07-002 3x 310mm reversible knives for the Hammer A3-31 Jointer/planer.
Couple of months old.
One side has not been used at all
The other side has had very little use, and are still razor sharp. They do have one tiny nail knick, which I tried to photograph - darn thing is so small it's hard to spot. I didn't even realise it was there until I removed them. I hadn't noticed any lines on anything that I put through the machine.
Anyhoo. Use the untouched side, then give the other side a decent sharpen and you'll be cheerin'
They're just over $100 a set new when I got them - likely a bit more now as Felder have ramped up their prices, blaming the exchange rate, mice in the hold, storms and various alurums.
How about $40?
a3 knife.jpg
-
26th May 2020, 07:11 PM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 2,903
"alurums"? Is it them making up words, or you?
-
26th May 2020, 08:18 PM #3GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
-
29th May 2020, 08:57 PM #4SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 741
I’ll take them. Thanks
Sent from my iPhone using Tapatalk
-
30th May 2020, 08:53 AM #5GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
sold pending payment