Thanks Thanks:  0
Likes Likes:  4
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    75
    Posts
    496
    Post Thanks / Like

    Default fish cleaning table Q

    as per other posts about a campsite I am managing, the fish cleaning table is an old stainless bench & sink. It sits ?? on a 30mm square metal tube frame why?? and this is (wow surprising) rusting out. I could build one from jarrah timber from my collection but thinking sideways or too many reds. There is enough 30mm high pressure PVC pipe and connections I could make it from, then would this be stronger (and last longer) if I filled each piece of pipe with either sand or crusher dust/dolomite and rammed that it...
    would it be worthwhile?
    I would love to grow my own food, but I can not find bacon seeds

  2. #2
    Join Date
    Apr 2014
    Location
    Little River
    Age
    78
    Posts
    225
    Post Thanks / Like

    Default

    Empty PVC under a load (the table) will tend to soften and sag on one of our hot summer days so I would suggest that you would be better of filling the tube with wooden dowel to give it some rigidity.

  3. Likes Tonyz liked this post
  4. #3
    Join Date
    Jul 2011
    Location
    In between houses
    Posts
    185
    Post Thanks / Like

    Default

    Stainless steel is cheap these days, not really much more than steel, and you can buy a packet of stainless welding rods easily, go for stainless, snd never have to do it again,

  5. Likes Beardy liked this post
  6. #4
    Join Date
    May 2020
    Location
    Melville, WA
    Age
    60
    Posts
    20
    Post Thanks / Like

    Default

    A bit late replying now.... another suggestion might be to make it out of cement.

    Make a solid cement table 70-100mm thick. Nice and solid and easy to clean.
    A simple mould, a bit of mesh in the middle.


    Sloped in one direction for the liquid to drain.

  7. #5
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    73
    Posts
    166
    Post Thanks / Like

    Default

    Concrete wood be better than cement. Cement is a gray powder, no good for anything.
    I am learning, slowley.

  8. Likes pker liked this post
  9. #6
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    168
    Post Thanks / Like

    Default

    Awww cmon harden up....

  10. #7
    Join Date
    Feb 2016
    Location
    Rockhampton
    Posts
    28
    Post Thanks / Like

    Default

    I do lots of filleting and prefer to fillet on plastic as it’s nicer on knives. You can be careful with your knives but when a friend helps they will hack into the bench or scrape scales ect of the bench with the knife edge .

    If you reuse the stainless top try get something like this to sit on top.



    The perforations allow the the slime, scales ect to fall through and give a good grip on the fish to stop it sliding around.

    Also good to place fillets on so they are not sitting in a pool of water (I do not like wet fillets - you don’t wash a steak so why wash a fish fillet?). Also stops them sliding off the bench like on stainless.

    If you can make it so all the slime, water ect flows to the sink then runs away from the bench in a pipe so the area doesn’t get all wet and muddy and keeps the smell away if frequently used.

  11. Likes clear out liked this post

Similar Threads

  1. Hall table brass need cleaning and protection
    By Blackout in forum RESTORATION
    Replies: 5
    Last Post: 9th June 2018, 07:49 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •