Thanks Thanks:  1
Likes Likes:  2
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 14 of 14
  1. #1
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174
    Post Thanks / Like

    Default Anyone successfully uploaded and run an animated GIF?

    I can tell my gif is animated as it runs in a vanilla browser window.

    When I upload it using the forum image uploader - its about 1 min long and 2.5Mb - it only uploads the first frame.
    Maybe there's a size limit involved?

    Any ideas?

    Thanks

  2. #2
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174
    Post Thanks / Like

    Default

    I've found out GIFs are limited to 1.9Mb so I down sized the animated gif to 1.7Mb but still no luck - it still just loads the first image.

  3. #3
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183
    Post Thanks / Like

  4. #4
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183
    Post Thanks / Like

    Default

    Tested. Its the forum.

    Rather than point to the actual GIF itself, it is pointing the image through a PHP redirection script: https://www.woodworkforums.com/attac...288740&thumb=1

    This means the browser is unaware it is actually a GIF as it doesn't have the right headers (says its a HTML)

    If one clicks the image (of cute octo!) it pulls it up as an "actual" image and it behaves.

    I could fix this in the script, but I dont run the forum

    IF the forum admin should choose to do so, they could remove the &thumb=1 and constrain the image with a SIZE="" attribute. This would then animate.

    e.g. https://www.woodworkforums.com/attac...hmentid=469509


    edit: Cant readily be done. The input box doesnt allow one to put raw HTML, php or even a javascript. There is a vBulletin mod called GIPHY that will do it, but its inelegant. IF the forum were nice, it would provide a direct path to the image rather than run it via their PHP script? ..... orrrrr mod the "thunb" attribute....i.e. chop it off

    edit 2: it is do-able. See below.

  5. #5
    Join Date
    Oct 2004
    Location
    Glen Forrest, Western Australia
    Age
    63
    Posts
    20
    Post Thanks / Like

    Default


  6. #6
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183
    Post Thanks / Like

    Default

    If the forum modifies only two tags it can be done easily.

    Here is a highlight showing it working, on the forum, with a small edit to the burped up HTML.


  7. #7
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183
    Post Thanks / Like

    Default

    Ah ha!

    Insert image, use dialogue from Remote URL, then untick box.

    Image needs to be inserted from remote server.... or does it...... what if I upload it first!!!!

    Capture.JPG

    This image is on DUCKDUCKGO's mirror archive....






    and this one is hosted on the forum, after uploading it as you would normally (Manage Attachments below)




    TRA DA!!!!!! Hosted on the forum AND showing as an animated GIF.

    Wowsers!

  8. #8
    Join Date
    Oct 2004
    Location
    Glen Forrest, Western Australia
    Age
    63
    Posts
    20
    Post Thanks / Like

    Default


  9. #9
    Join Date
    Oct 2004
    Location
    Glen Forrest, Western Australia
    Age
    63
    Posts
    20
    Post Thanks / Like

    Default

    That wasn't the way I did it

    [img]image web address [/img]

    It must do the same thing

    Rick

  10. Likes woodPixel liked this post
  11. #10
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174
    Post Thanks / Like

    Default

    Quote Originally Posted by woodPixel View Post
    and this one is hosted on the forum, after uploading it as you would normally (Manage Attachments below)

    OK I downloaded your image and then reposted (1.07mB) using manage attachments, it and it works.
    But when I upload mine (1.7Mb) the same way it doesn't - it only uploads the first frame (37kB)


    external-content.duckduckgo.com.gif Run2w.jpg

    My image is generated by LICEcap and then taken through GIMP and saved as a animated GIF
    It runs fine in a web browser when I load it directly.

  12. #11
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183
    Post Thanks / Like

    Default

    It claims, in that images header, to be a JPG.

  13. #12
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174
    Post Thanks / Like

    Default

    Interesting it's sitting on my HD as a GIF and the forum upload converts it to a jpg??

    I can also see its a jpg in the "Manage Attachments"

    Now I can't even load any of them?
    Attached Images Attached Images

  14. #13
    Join Date
    Oct 2004
    Location
    Glen Forrest, Western Australia
    Age
    63
    Posts
    20
    Post Thanks / Like

    Default

    Try uploading it to Imgur and using the BBcode to share in a post


    Rick

  15. Thanks BobL thanked for this post
  16. #14
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174
    Post Thanks / Like

    Default

    Thanks Warrick - that seems to be working - but why the hell doesn't it work with the WWF upload?

    I'll have to refine the timings so that all the solar panels show power


  17. Likes warrick liked this post

Similar Threads

  1. Replies: 1
    Last Post: 28th January 2008, 11:23 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •