Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18
  1. #16
    Join Date
    Oct 2008
    Location
    Perth
    Posts
    0

    Default

    Quote Originally Posted by rod1949 View Post
    As I said all that needs to be removed is the starter. Go and get one and ask if it doesn't work will they take it back.... simples
    Yes, but I have electronic ballasts which don't have starters. I think I said that somewhere above. Plus, the instructions specifically say (on the ones I bought at least) for use with mechanical ballasts - their bolding.

  2. #17
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    63
    Posts
    189

    Default

    Not likely to work with electronic ballast.

    With iron core ballast, you will need to change the starter to an LED starter (which is more like a fuse). If you just remove the starter you will have an open circuit.

    There are a variety of LED tubes available, make sure you have the correct one for your situation.

  3. #18
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    63
    Posts
    189

    Default

    Just changed some fluro tubes at home with LEDs.
    Note how the LED tubes come with substiTUBE starter. This replaces the fluro starter.
    Also in the packaging is a sticker (one for each tube) to say that it has been changed to LED to stick on the fitting.

    Now the lights don't flicker when you turn them on.
    Attached Images Attached Images

Similar Threads

  1. Damn it; no shed lights.
    By Toggy in forum LIGHTING
    Replies: 8
    Last Post: 16th July 2015, 08:54 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •