Results 1 to 15 of 16
Thread: Wood allergy
-
24th October 2005, 07:43 PM #1GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 614
Wood allergy
Anyone else here suffer from a generalised wood allergy (ie allergic to all kinds of wood - or wood dust). If so, how do you get around it ?
cheers
Arron
-
24th October 2005, 08:07 PM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Go here and look at bad woods.
Al
-
25th October 2005, 12:53 PM #3
wood allergies
Hi Aron,
I to suffer from allergies and most saw dust sets me into a severe sneezing mode. Silky oak is a good one as it has sent me over the edege from time to time. I didn't sneeze or cough much when working with some brush box over the last weekend. To counter it I wear a P1 rated dusk mask and don't have any worries.
-
25th October 2005, 01:49 PM #4
I've chosen to never work with red cedar again, because of the reaction I have to it, unless I have proper equipment that will negate the effects of the dust.
cheers
RufflyRustic
-
25th October 2005, 05:53 PM #5
I have a strange reaction. I get depressed, and moody if I don't go near sawdust for too long.
Boring signature time again!
-
25th October 2005, 06:01 PM #6GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 614
Actually, its not a matter of being allergic to some particular woods - I'm allergic to them all. Its a contact allergy unfortunately, so dust masks etc wont help - the dust can contact any part of the body and the reaction will occur. The reaction is an itchy contact dermatitis. Its an unfortunate thing to have for a keen woodworker - but I'm glad I'm not a professional as I can knock off when I feel like it.
The drug 'Telfast' stops the allergy quickly and completely for a period of about two days - which is nice, though I dont want to be taking this drug all my life.
I havent yet found any one wood species to which I am more sensitive then any other, though I always watch closely when dealing with the usual suspects.
Arron
-
26th October 2005, 10:01 AM #7
Arron, that's rough, really rough. Good to hear that you can get some relief, but I'm sorry, I can't think of anything to help you other that a really good dust extraction system, an air purifier/cleaner and covering as much skin as possible when making sawdust.
RufflyRustic
-
28th November 2005, 10:38 AM #8New Member
- Join Date
- Nov 2005
- Location
- ca
- Posts
- 3
Originally Posted by ArronHerbal skin cancer salve- recognizes it and goes after it. www.new-raves.com
-
28th November 2005, 11:22 AM #9
[QUOTE=Arron]Anyone else here suffer from a generalised wood allergy/QUOTE]
No but I do suffer from a generalised work allergy.
-
28th November 2005, 11:28 AM #10
Arron
Take up pottery.
-
28th November 2005, 08:07 PM #11
I believe that there's another current thread going on a related topic - drink port. Lots of it, especially crusted vintage port:eek:
A tad mor seriously, I sometimes have issues with Camphor, Blackwood and a few others; mostly dermatitis, so I use a barrier cream (more port)!
Cheers!
-
28th November 2005, 08:08 PM #12Originally Posted by Arron
Is 'Telfast' a prescription or OTC drug?
Cheers!
-
28th November 2005, 08:21 PM #13Originally Posted by Auld Bassoon
-
28th November 2005, 08:25 PM #14Originally Posted by Termite
I think I'll try some
Cheers!
-
28th November 2005, 08:35 PM #15GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 614
make sure you get the version of Telfast that is specifically marked 'relief of hayfever allergy or itchy skin rash/hives'. Its in a green packet. The usual version may not work so well with skin things.
Arron
Bookmarks