![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
-
24th November 2019, 08:39 PM #1
GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Carbatec 10" Bandsaw and stand: BAS-250C
Spec of current all-blue model here: Carbatec 10" Bandsaw | Bandsaws - Carbatec
Youtube review of this particular model: YouTube
Got to clear some space while I level more of my alpine garage floor, so a few tools to come.
I bought this bandsaw last year from an old pen turner who discovered he had terminal cancer. I felt sorry for him and bought a few extra bits. It's a great little saw and I use it regularly. I'm in no hurry to have it collected as I still need to get the Hammer VFD'd and wired up so happy to hold it for a bit.
10", 350W; Comes with the blade on the machine, plus two new and unused 6mm/6TPI blades. There's also another broken blade included - they're easy to silver-solder, but I've never bothered with all the spare blades lying around, and they're only 20-odd bucks a pop.
Can be unbolted from the stand for easy transport. It's not overly heavy. Newcastle NSW pickup.
Not far off $600 new value there, so how about $350?
bandsaw front.jpg bandsaw front 3qrtr.jpg bandsaw front side.jpg bandsaw plate.jpg bandsaw motor.jpg bandsaw back.jpg bandsaw table.jpg bandsaw top wheel.jpg bandsaw bottom wheel.jpg bandsaw blades.jpg
-
27th November 2019, 08:43 PM #2
GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Off to the denizens of Scumtree then
-
4th December 2019, 03:29 PM #3
GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
sold