Results 1 to 7 of 7
  1. #1
    Join Date
    Aug 2002
    Location
    Perth, WA
    Age
    77
    Posts
    884

    Default Customer service - wha....?

    I had an interesting experience on Friday and because I've still got the sheets about it I'll post it here in the hope that this may relieve my feelings. In any event, it may serve as an interesting example of how not to deal with a customer!

    Couple of weeks ago, I dropped into a business that sells doors and got them to give me a quote on two louvred pantry doors (and before you start, yep, I could make them myself but I'm not that interested in the tedium of producing a louvred door with very little in the way of automated tools). The bloke quoted me $170 plus GST for the pair.

    On Friday, I went back - intending to order them. The bloke I had seen previously wasn't there but two other people were. I explained that I'd had a quote of $170 plus GST and said I now wanted to place an order.

    While the bloke was writing out a docket, his female colleague looked up a price in price list book. She then told us that the price was $107.80, inclusive of GST. I queried this because I was absolutely sure that previously the quote had been $170. I repeated what I had been told on the earlier occasion:

    "$170 plus GST for the pair."

    "No, you must have mis-heard because the price is $107.80," she said. "See, it sounds similar: $170 and $107.80".

    "Well," I said. "I'm pretty sure I didn't mis-hear. The price I was given was $170 plus GST. Are we talking about the same specification?"

    We went over the details: size, type of timber, pick-up or delivery etc. The lady was adamant about the lower price and was treating me with that slightly condescending attitude you sometimes meet in people who are dealing in their own speciality. You know the attitude: you're a poor ignorant punter and can't possibly understand the technical sophistication and complex procedures involved. I have a fairly high level of tolerance for this sort of meaningless nonsense so I wasn't upset by the condescension - yet!

    Once I was satisfied that the doors being quoted were the right size, shape and so on, I happily accepted the lower price. The bloke wrote out a docket for two doors etc and I paid a $50 deposit; doors to be ready next week, expect a phone call.

    I drove away. Ten minutes down the road I get a call on the mobile. It's the lady from the door place. In a voice full of righteous indignation, she tells me that I should have made it more clear to her that I wanted two doors. The price she had given me and her colleague was for one door. This meant that the price was actually $215.60 - not $107.80. She repeated that if I had made it clear to her that I wanted two doors, this mistake would not have happened. :confused: I told her that I had made it abundantly clear to her and her colleague that I wanted two doors. Her colleague had written a docket for two doors.

    "Yes, but if you had made it clear to me then I would have given you a price for two doors!"

    I told her I wasn't happy with any of this. I had made it clear that I wanted two doors, I had queried the low price a couple of times. I had referred to the original quote.

    Her reply was to tell me that if I wasn't happy I should cancel the order and go in and collect my $50 deposit! :mad:

    So I told her that I agreed with her - cancel the order.

    When I got home, I rang a couple of other companies and found one who quoted me $170 plus GST for two doors. What a surprise! Furthermore, the lady I spoke to wasn't a bit condescending about it.

    On the way to pay my deposit to the new company, I called in and collected my deposit from the original company and got another bollocking for "Not making it clear to me that you wanted two doors!" :mad:

    That just about did it. I held up my hand to stop the flow.

    "Listen," I said. "I don't mind about the fact that you made a mistake. I don't even mind all that much about the fact that your final price was nearly $30 more than what your colleague quoted me a couple of weeks ago. What I mind is that you haven't apologised once for inconveniencing me and, in fact, you've taken the attitude that it has all been my fault! Because of that, you've not only lost this order but any order I might want to place for doors in the future."

    As I was walking out, she was giving another lecture to my departing rearview about how inconvenient it is when customers don't make it clear what they want! :mad:

    OK - I feel better now.

    Col
    Driver of the Forums
    Lord of the Manor of Upper Legover

  2. #2
    Join Date
    Aug 2003
    Location
    Conder, ACT
    Age
    78
    Posts
    4,213

    Default

    Was she PMT??

  3. #3
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Bloody customers always think they are right.

    I was thinking this arvo about writing some of the stuff we hear in the shop.
    I will put it up at a later date.

    Al

  4. #4
    Join Date
    Feb 2005
    Location
    Mackay Qld
    Age
    50
    Posts
    1,039

    Default

    A petty meaningless twhat

    or a pouty mongrel-faced tool
    Mick

    avantguardian

  5. #5
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Quote Originally Posted by Gingermick
    A petty meaningless twhat

    or a pouty mongrel-faced tool
    Thats no way to talk to Col!!

    Al

  6. #6
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    247

    Default

    AAAAAHHHH Retail, if it weren't for the customers it would be a fantastic career
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  7. #7
    Join Date
    Jan 2005
    Location
    Sydney
    Posts
    191

    Default

    Silly cow, i would have told her to sticker her "FINE" doors up u know where....

Similar Threads

  1. The help desk -- how may I help you?
    By Bob Willson in forum JOKES
    Replies: 5
    Last Post: 17th November 2004, 04:45 AM
  2. How's this for customer service?
    By Driver in forum HAVE YOUR SAY
    Replies: 9
    Last Post: 25th May 2004, 05:04 PM
  3. cust is always right
    By Gino in forum JOKES
    Replies: 1
    Last Post: 2nd November 2001, 07:21 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •