Results 1 to 8 of 8
Thread: No Paragraphs & No Attachments
-
29th December 2018, 09:24 AM #1Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 41
No Paragraphs & No Attachments
I cannot have paragraphs in my posts. The following copied from another site should have 3 paragraphs. Line breaks are also white space characters. Note that although 
 and 
 are defined in [ISO10646] to unambiguously separate lines and paragraphs, respectively, these do not constitute line breaks in HTML, nor does this specification include them in the more general category of white space characters. This specification does not indicate the behavior, rendering or otherwise, of space characters other than those explicitly identified here as white space characters. For this reason, authors should use appropriate elements and styles to achieve visual formatting effects that involve white space, rather than space characters. For all HTML elements except PRE, sequences of white space separate "words" (we use the term "word" here to mean "sequences of non-white space characters"). When formatting text, user agents should identify these words and lay them out according to the conventions of the particular written language (script) and target medium ALL I GET IS A WALL OF TEXT. The Manage Attachments button is also not working. I'm using Firefox.
-
29th December 2018, 09:30 AM #2GOLD MEMBER
- Join Date
- Mar 2018
- Location
- Sydney
- Posts
- 268
try not pasting !
Seriously, I can paste text here fine. Here's some from Whirlpool. I'm using Edge in Win10.
On Tuesday the wireless basically dropped out for every device in the house (yeh we have a few) and tonite selective devices could not see other devices on the network. These devices are hardwired into the router directly.At the moment I am thinking the new firmware as previous to the update I had never power cycled the box and it had been running non stop since I bought it.
Edit: ok so one of the edit boxes works better than another.
Edit 2: I've tested the reply HTML boxes (both the standard and advanced modes) and they don't interpret the (/BR) HTMLs as valid CR/LFs. It's unlikely that this experience has changed, or will. If you paste into notepad then into here, you'll see the HTML to text conversion gets a CR/LF, then you get some spacing. New example below, which was pasted into Notepad, then Ctrl-A select all, copied again, and then pasted in here.
On Tuesday the wireless basically dropped out for every device in the house (yeh we have a few) and tonite selective devices could not see other devices on the network. These devices are hardwired into the router directly.
At the moment I am thinking the new firmware as previous to the update I had never power cycled the box and it had been running non stop since I bought it.
-
29th December 2018, 09:57 AM #3Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 41
Sorry poundy, I should have made my post clearer. I get no paragraphs, ever. The following ABs should be on seperate lines. A B A B A B A B A B. As you can see the enter key produces a space not a line break.
-
29th December 2018, 10:14 AM #4
At the top of the page select Settings.
From the menu on the left select General settings
Scroll down and find the Miscellaneous Options.
Check you have Enhanced interface checked.
-
29th December 2018, 10:19 AM #5Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 41
Can confirm Enhanced Interface - Full WYSIWYG Editing is selected. A B A B
A
B
A
B
OK solution is found. Paragraphs are not possible on the https version of the site.
-
29th December 2018, 11:25 AM #6.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
-
29th December 2018, 11:41 AM #7GOLD MEMBER
- Join Date
- Mar 2018
- Location
- Sydney
- Posts
- 268
in HTTPS mode myself
Ababab Edit: yep, https seems not happy
-
29th December 2018, 12:29 PM #8
Similar Threads
-
No Paragraphs
By Paul39 in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 3Last Post: 12th July 2014, 05:15 AM -
Attachments to PM's
By watson in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 4Last Post: 21st July 2007, 11:56 PM -
Attachments
By pfisher in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 1Last Post: 20th January 2007, 05:58 PM
Bookmarks