Results 1 to 15 of 15
Thread: RACAL POWERED DUST MASK
-
6th April 2014, 06:51 PM #1
RACAL POWERED DUST MASK
I have had my faithful Racal Powered Dust Mask for some years. I probably should have worn it more often, truth be known. I am after a new filter for it but I can't find a supplier
I looked at Carrole's and Carba-Tec but alas no one seems to have them. Am I now the owner of a prehistoric machine? Ebay didn't have anything either so where do I go from here?
Can someone point me in the right direction.....pleaseJust do it!
Kind regards Rod
-
6th April 2014, 08:48 PM #2
Try protector safety as they were still bringing in the racal parts, has been a while so this may be old news
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
6th April 2014, 10:00 PM #3
Thanks Jim I will give them a try. Blackwoods also have a filter about thr right shape but have no idea if it will fit. It seems Racal have been taken over by 3M. Could be in for a "run around"
Just do it!
Kind regards Rod
-
15th April 2014, 08:39 PM #4SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Mooloolaba, Qld
- Posts
- 0
Racal powered Dust Mask
I have been able to source all products for my Racal from Airwave America
www.AirwaveAmerica.com Email [email protected]
Found them excellent folk to deal with. Apologies or late reply.
Regards,
Bruce
-
15th April 2014, 09:43 PM #5
Thanks for the link Bruce. I tried your link but it wouldn't connect but I was able to get onto them at
http://www.airwaveamerica.com/. I had a good look at what they are offering and I think I may have found some filters. When I get a chance I will photograph my respirator and Email them with some numbers off the thing. My set up was bought in 1996 so parts may be bordering on rocking horse poo
Edit....Mmmm that link will only work (with Chrome) if you copy it and use it away from the Forum???Just do it!
Kind regards Rod
-
15th April 2014, 10:48 PM #6SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Mooloolaba, Qld
- Posts
- 0
Racal Dust Mask
Sorry the link did not work. I have NO computer ability at all. Airwave have continued to support Racal Respirators since Racal were sold to 3M.
Good luck.
Regards,
Bruce
-
15th April 2014, 10:56 PM #7
Thanks Bruce, don't worry, my computer skills are probably no better than yours
As I said earlier they seem to be the only crowd that looks like they may have something fit my Racal. I really only need a couple of filters. If/when the battery goes I think I will get them rejuvenated by Accupac. They did a couple of Ryobis for me some time ago that I was quite happy withJust do it!
Kind regards Rod
-
16th April 2014, 01:08 PM #8
Is that Airwaveamerica or Airwareamerica?
http://www.airwareamerica.com/
Growing old is much better than the alternative!
-
22nd April 2014, 05:05 PM #9
-
22nd April 2014, 08:53 PM #10
I will have to look over the mask to establish what its catalogue number is. I bought it in 1995. Yeh that surprised me....I didn't think I have had it that long.
Just do it!
Kind regards Rod
-
22nd April 2014, 09:37 PM #11
I have gotten up off my butt and have details and pix of the Racal Respirator. Yes it was surprising that the mask was bought in 1995 because it is actually 9/96! (very observant are't I)
On the cover of the air filter box there the numbers 020-00-38 then under that MM045400 09/96 These are shown in the photos as well as the mask.
Hopefully someone may have a filter to suit. That is really all I need. If I could get a couple then I will be right for sometime. If/when the battery goes I would go to Accupac to rebuild the battery pack.Just do it!
Kind regards Rod
-
22nd April 2014, 10:47 PM #12
Its a DM4 don't think I have much for them.
I bought my Airstream in '84 and a DM4 in the late 90s.
Ill have a scrounge in the shed tomorrow but I'm not hopeful.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
23rd April 2014, 10:26 PM #13
Filter for Racal.
I have a new filter to suit plus a few of the pre filters.
The filter is $30 and the pre filters $5 each.
Plus postage.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
23rd April 2014, 11:36 PM #14
Wow!! I will send a PM with my postal details and I can do a Direct Deposit into your bank. Many thanks
Just do it!
Kind regards Rod
-
25th December 2018, 05:28 PM #15New Member
- Join Date
- Dec 2018
- Location
- canberra
- Age
- 86
- Posts
- 1
Replacement Visor for RACAL Dustmaster MKII DM4
Hi
here I am in December 2018 with a very old Racal Dustmaster Mk II DM4 dust mask. Looks identical to the pics posted above.
Still going strong although the battery pack died some years ago. I opened up the pack and replaced the rechargeable battery pack with 2 (or 3?) rechargeable batteries that I bought from Jaycar in Canberra. Worked fine! If anyone is interested I could open up the battery pack to see what I did with the new batteries, and if I wired them up inseries or parallel and could supply pics.
My question is: where can I buy a replacement for the transparent 8" visor, which is quite scratched now. Part number 049-02-05P.
I live in Weetangera ACT Australia.
Similar Threads
-
Powered Dust Mask
By Wayne Davy in forum HINTS & TIPSReplies: 10Last Post: 29th October 2003, 08:32 AM
Bookmarks