Results 1 to 15 of 15
  1. #1
    Join Date
    Dec 2008
    Location
    Tauranga
    Posts
    0

    Default Coopers paint stripper

    Has anyone used this, it's not, cheap however it looks like a lot healthier than putting a belt sander on a door covered with lead paint.

    Easy Paint Stripping

    My only other concern is that it all looks to easy, my ######## detector starts to ring in cases like these, lol.
    Any feedback or better ideas much appreciated.

    Cheers

    Jon

  2. #2
    Join Date
    May 2010
    Location
    melbourne
    Posts
    7

    Default Stripper

    The same or at least similar paint stripping system is also available in Australia. I am interested in using it on my boat restoration in stripping the clinker planks of their varnish and hopefully the stain as well. So any comments would be appreciated
    Regards
    Peter

  3. #3
    Join Date
    Dec 2008
    Location
    Tauranga
    Posts
    0

    Default Coopers update

    I am going to have the inventor, Simon, over to demonstrate in the next few weeks, so will give a review for anyone interested.

    Cheers

    Jon

  4. #4
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    Look forward to the review. I plan on stripping paint from the skirting and architraves from our 100+ year old house so lead will be a concern. I have ordered from Soy Gel to test after reading a positive review in Australian Woodworker ....... just waiting for it to arrive.
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  5. #5
    Join Date
    Dec 2008
    Location
    Tauranga
    Posts
    0

    Default Sounds interesting

    We can compare notes a I just need something that is quick, clean and won't poison me.

  6. #6
    Join Date
    Nov 2007
    Location
    inner city sydney
    Age
    55
    Posts
    18

    Default

    +1 for peelaway 9 (marine version).

    I've picked it up in Sydney in bulk 20kg tubs @ $220 at amazing paints.

    I could have sworn I posted a reply to someone ages ago about doors but cant find it now

    Needs no neutraliser/rinse unlike their other ones, needs coating paper but this is a plus as it stops drying, and is good for safe lead paint removal.

    I've used this on house (lime render, architraves etc) and furniture with little complaint. Could leave it on cedar, pine etc wrapped up for 2 weeks and would pull paint of intricate wooden/plaster moulding perfectly.

    The only times I've seen it fail is when it wasn't used correctly, mostly from people who read the instructions then decide their own ones (ie cheap thin smear thinking it'll go further etc).

    Any time things aren't going 100% your way with the stuff, you've gotta take perspective and think 'how much would I be swearing/cursing, how long would it take and how much would it cost if I was doing it with abc method'. 9/10 times with the work I do I'm happy with the chosen medium.

    Jon, your ######## detector is working, but the needle is fluctuating. The same as with all of these strippers, depends on what you're taking off, what it's sitting on and how it was prepped/applied. I HAVE stripped doors with that stuff ages ago that almost worked like the ad, and have stripped other stuff that had me cursing- although if it was my business I could understand why I would choose to promote the former.
    Having said that it's hard to believe looking at the ad they're not selling magic paint stripping wands

    Peter- with these types if you want to take the stain off as much as possible you have to catch the magic time when it's saturated the solid coating as much as it will and is still liquidy/moist underneath. Going either way is very counterproductive in the long run (would explain why they print test patch notes on their cover paper).

    In your case I'd suggest buying the smallest sample sizes if possible to try different brands to see what's going to work best (I've only bought a few 20kg tubs myself) with the varnish before commiting to the bulk size needed for a boat.


    Cheers,
    G

  7. #7
    Join Date
    May 2010
    Location
    melbourne
    Posts
    7

    Default Peelaway

    Thanks for that info. I just had a look at the peelaway system. It seems good but sadly the specs for both Peelaway 1,8 and 9 say that it is not suitable for veneers and most importantly in my case plywood.

    I'm having a look at the coopers system in Sydney probably on Saturday.


    Peter

  8. #8
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    The peelaway sounds good. Roughly how much area does the 20kg cover?
    I am still waiting on the SoyGel. Lost in the post by the sounds of it and now waiting for more stock to arrive
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  9. #9
    Join Date
    Nov 2007
    Location
    inner city sydney
    Age
    55
    Posts
    18

    Default

    Quite suprised 9 wouldn't be suitable unless it was a thin veneered hide/water soluble glue- I've used it thinly on a singer sewing machine lid/top (but not on the rest) and it held ok.

    If applied carefully and not let to absorb over days (so it just saturates paint, not wood) then it wouldn't be too bad....

    I think I've stripped the front of a double fronted cottage (prob 40m square from memory- includes porch wall) with a fresh half 20kg tub, although coverage mainly depends on four things-

    • correct application/thickness
    • type of coating that it is saturating
    • base material absorbency/texture/original prep
    • and the all important how much 'postparation' you are prepared to do


    To a lesser degree there's also age of the stuff, temp, humidity etc etc etc

    Cheers,
    Garth

  10. #10
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    Thanks for the info Garth .... are you using Peel Away Eight?
    I can only find reference to 8 and 1 not 9.
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  11. #11
    Join Date
    Nov 2007
    Location
    inner city sydney
    Age
    55
    Posts
    18

    Default

    Nup, it's definitely the 9- the only one that doesn't require a neutraliser. Might go under the name of their marine version since I last got some...

    Just had a quick look and it looks like they've done exactly that with 8 and 9- they must have decided that boat owners must have bigger pockets than woodies.

    Either that, or a few boat owners have just bought 'peelaway' generically and taken off more than they bargained for...

    Peel Away®, Dumond Chemicals - Applications and Solutions
    PEELAWAY 9 Marine Safety Paint Stripper - 15kg | eBay

    Never tried the lower numbers and didn't want to- I've lived too long now to see that after using a stronger stripper than necessary on nice wood, then to neutralise it with acetic acid afterwards is adding too many layers to the cake. Not to mention the extra steps taken timewise.


    Cheers,
    Garth

  12. #12
    Join Date
    May 2010
    Location
    melbourne
    Posts
    7

    Default Coopers paint stripper

    Well I bit the bullet and bought the coopers paint stripper system from the heritage building centre in Sydney.

    I initially bought the 0.5 ltr kit as I didn't want to outlay a lot of money on something that may not work. Last week after trying the stripper and the flushing solution on a part of the inside of the boat I was impressed enough to purchase another 2 litres of the product to continue the stripping process.

    I have to say that I am very impressed with the way that this stripping system works. I have probably stripped about nearly 40% of the inside with 2litres of the stripper. Admittedly the inside was not heavily coated with paint so it has been easier than I would have first thought but it does work really well.

    If I knew how to post some pictures I would do a post a couple of before and after photos that I have which would convince people

    Cheers
    Peter

  13. #13
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    48
    Posts
    318

    Default

    I think the product looks good, but I was struggling to pay too much attention as I was laughing so hard at the music

    do do do do do strip it
    de de de de de de de strip the wood

    Perhaps it is just me, but jingles very rarely help a situation.

    I need to strip a staircase at home that will have lead paint, so this looks like the business. will give it a go.

    Trav
    Some days we are the flies; some days we are the windscreen

  14. #14
    Join Date
    May 2010
    Location
    melbourne
    Posts
    7

    Default Coopers paint stripper

    I eventually finished the paint removal from the entire interior of my boat. It took a while but it came up really good.

    I think that you will be impressed with the product.
    One thing of warning. Use a charcoal filter dust mask. The stripper is not too bad for the smell but the flusher is really something else and reall knocked my breathing around.

    Cheers
    Peter

  15. #15
    Join Date
    Nov 2018
    Location
    Auckland
    Posts
    2

    Default

    Quote Originally Posted by piquet View Post
    Well I bit the bullet and bought the coopers paint stripper system from the heritage building centre in Sydney.

    I initially bought the 0.5 ltr kit as I didn't want to outlay a lot of money on something that may not work. Last week after trying the stripper and the flushing solution on a part of the inside of the boat I was impressed enough to purchase another 2 litres of the product to continue the stripping process.

    I have to say that I am very impressed with the way that this stripping system works. I have probably stripped about nearly 40% of the inside with 2litres of the stripper. Admittedly the inside was not heavily coated with paint so it has been easier than I would have first thought but it does work really well.

    If I knew how to post some pictures I would do a post a couple of before and after photos that I have which would convince people

    Cheers
    Peter

    I am stripping ceiling battens, architraves, doors, windows etc back to the rimu in my 30s bungalow with Coopers Restore System. I haven't decided on the final finish yet.
    I would really like to use the Coopers moisturizer as a finish as the test piece looks amazing, but not sure on how easy it is for long term maintaining, (wiping fingerprints etc) and if it lasts well and protects the wood. i.e opening window frames etc that may get a spatter of water on from time to time.
    I know you cant use the moisturizer it in wet areas (bathrooms) so wondered if anyone else has used it and how they tied the polyurethane and moisturized looks together i.e bathroom opening to hallway.
    I cant find many independent reviews from anyone who has used it apart from the Coopers salesman.
    Would really appreciate any feedback from anyone who has used it

    Jewels

Similar Threads

  1. Have YOU used an Infrared Paint Stripper?
    By Freo in forum FINISHING
    Replies: 2
    Last Post: 8th October 2010, 03:19 PM
  2. Homemade Paint Stripper
    By glenmackinnon in forum PAINTING
    Replies: 4
    Last Post: 5th March 2008, 07:59 PM
  3. Paint Stripper
    By Shaty40 in forum FINISHING
    Replies: 4
    Last Post: 30th September 2005, 08:50 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •