Thanks: 0
Likes: 2
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: A Sagar for Sion.
-
2nd October 2018, 04:42 PM #1
A Sagar for Sion.
I don't know if Sion Dovey still visits this site, but this is as much a "Ebay droppings" thread, as a look at another Sagar.
This thicknesser was for sale here recently. There's not much info, but it seems to be a 30" thicknesser, 3-phase (of course) and last ran a couple of years ago.
It looks okay at first glance.
Sagar1.jpg Sagar2.jpg
But that dark line on the right hand side (below table) might be more than a scratch in the paint.
Sagar3.jpg
It's been in the wars . Damaged cover over the table. What looks like significant damage around the trunnion in the frame (to right of tie-down), and replaced (and re-damaged) handwheel.
Sagar4.jpg Sagar5.jpg
And the seller wasn't selling at a "parts" price either .
Enjoy!
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
2nd October 2018, 07:23 PM #2
This might be what it looked like before being attacked by heavy machinery.
Sagar6.jpg Picture from 'Modern Woodworking Machinery' (1924) courtesy of VM.
So there are also gear cover(s) missing.
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
2nd October 2018, 10:16 PM #3
That old Girl has had a hard life Vann. Thanks for showing.
Melbourne Matty.