Results 1 to 6 of 6

Thread: Loss of Gloss

  1. #1
    Join Date
    Apr 2013
    Location
    Sydney
    Posts
    74

    Default Loss of Gloss

    Team, can anyone tell me if Spray cans have a shelf life? if so, how long, and would shelf life cause Gloss to lose its Gloss? Yikes......... Test piece sprayed in Gloss 4 coats, sanding in between, Acrylic Clear coat gloss, came out flat as a tack. I think even sub satin.

    I am taking it back today to have the can replaced

    suggestions?

  2. #2
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,670

    Default

    Most obvious answer: Wrong labelling on the can. Maybe a bit too obvious.

    Did you shake the living daylights out of it each time before you used it?

    Was the ball rattling around freely in the can when you shook it?

    Was it a good brand or cheap stuff from the $2 shop?

    Because so many of our U-Beaut products need to be shaken really well I often ask people to show me how they will shake it and more often than not they do a bit of a wibble wobble which is all but useless for our products and they don't need to be as violently shaken as does a spray can.

    Cheers - Neil
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  3. #3
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    108

    Default

    Cans generally have a shelf life of 1-2 years, I'm not sure how the product is affected though. Exposure to extreme cold or heat might also cause it to go funny; if it's been sitting in your shed all year, I wouldn't be too surprised

    If it's particularly cold when you spray, it can go cloudy or not cure properly.

  4. #4
    Join Date
    Apr 2013
    Location
    Sydney
    Posts
    74

    Default

    Quote Originally Posted by ubeaut View Post
    Most obvious answer: Wrong labelling on the can. Maybe a bit too obvious.

    Did you shake the living daylights out of it each time before you used it?

    Was the ball rattling around freely in the can when you shook it?

    Was it a good brand or cheap stuff from the $2 shop?

    Because so many of our U-Beaut products need to be shaken really well I often ask people to show me how they will shake it and more often than not they do a bit of a wibble wobble which is all but useless for our products and they don't need to be as violently shaken as does a spray can.

    Cheers - Neil
    Nope, shook the living daylights out of it to make sure. I took it back and they swapped it out. It was White Knight Acrylic crystal clear, and def not $2.00

  5. #5
    Join Date
    Apr 2013
    Location
    Sydney
    Posts
    74

    Default

    Quote Originally Posted by elanjacobs View Post
    Cans generally have a shelf life of 1-2 years, I'm not sure how the product is affected though. Exposure to extreme cold or heat might also cause it to go funny; if it's been sitting in your shed all year, I wouldn't be too surprised

    If it's particularly cold when you spray, it can go cloudy or not cure properly.
    I have been waiting and it was definitely warm enough to spray. but as I just mentioned to Neil, I have replaced the can but even with a good sanding the new coat still goes flat, but not as flat so I have sprayed a new piece with no chance and has come up trumps. just a dodgy can I'd say.

  6. #6
    Join Date
    Dec 2010
    Location
    Melbourne
    Age
    80
    Posts
    36

    Default

    I had the same issue not with a spray but normal gloss enamel
    Paint had been in the can for more than 5 years,used it for a touch up and it dried flat,I had retinned from a 4 litre to a 1 liter can
    I asked a painter mate if that had even happened to him ,his reply paint around me doesn't last that long
    Any Ideas please

Similar Threads

  1. Weight loss.
    By Allan at Wallan in forum JOKES
    Replies: 3
    Last Post: 6th August 2016, 05:43 PM
  2. At a loss
    By specialist in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 3
    Last Post: 2nd January 2011, 05:12 PM
  3. Loss of power???
    By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 13th February 2009, 11:10 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •