Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Join Date
    Jun 2016
    Location
    Sydney
    Posts
    8

    Default Howard butcher block alternatives

    Hi all,

    Just wondering if there are any alternatives to Howard butcher block conditioner that I can get in Sydney?

    Thanks heaps.

  2. #2
    Join Date
    Dec 2010
    Location
    Mornington Peninsula
    Posts
    408

    Default

    Try our benevolent dictators product, Foodsafe Plus.

  3. #3
    Join Date
    Jun 2016
    Location
    Sydney
    Posts
    8

    Default

    Does it contain beeswax?

  4. #4
    Join Date
    Dec 2010
    Location
    Mornington Peninsula
    Posts
    408

    Default

    Even though I use it for chopping/cutting boards I do not know with any certainty. But I don't think so as the finish is not too waxy.

  5. #5
    Join Date
    Jun 2016
    Location
    Sydney
    Posts
    8

    Default

    Thanks cava.. I’ve just installed a laundry wooden countertop and planning on using paraffin oil and topped with something similar to the Howard conditioner which will give it extra protection. Hoping to get something that’s readily available locally.

  6. #6
    Join Date
    Mar 2009
    Location
    Sydney
    Posts
    67

    Default

    Not sure if this is actually what your after but I found Ikea have mineral oil a lot cheaper than i've found anywhere else.

  7. #7
    Join Date
    Mar 2014
    Location
    West Wodonga
    Posts
    9

    Default

    How about U-Beaut Traditional wax. Also food safe. U-Beaut Polishes - TRADITIONAL WAX Polish

  8. #8
    Join Date
    Jun 2016
    Location
    Sydney
    Posts
    8

    Default

    Quote Originally Posted by shanesmith80 View Post
    Not sure if this is actually what your after but I found Ikea have mineral oil a lot cheaper than i've found anywhere else.
    Are you referring to this?
    SKYDD Wood treatment oil, indoor use - IKEA

  9. #9
    Join Date
    Jun 2016
    Location
    Sydney
    Posts
    8

    Default

    Quote Originally Posted by Nifty Nev View Post
    How about U-Beaut Traditional wax. Also food safe. U-Beaut Polishes - TRADITIONAL WAX Polish
    That could be an option... The Howard product seems so easy to apply without having to buff

  10. #10
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default

    You could make your own. I make my own conditioner out of beeswax wax, mineral oil and orange oil. I have a wooden countertop that I apply it to regularly with good results. I plan on adding carnauba wax to the mix which will give a harder wearing finish. I use it on my cutting boards and even in the workshop on some tools.

  11. #11
    Join Date
    Dec 2010
    Location
    Mornington Peninsula
    Posts
    408

    Default

    Quote Originally Posted by groeneaj View Post
    You could make your own. I make my own conditioner out of beeswax wax, mineral oil and orange oil.
    What ratios are you using?

  12. #12
    Join Date
    Jun 2016
    Location
    Sydney
    Posts
    8

    Default

    Quote Originally Posted by cava View Post
    What ratios are you using?
    Also interested to know. Thanks

  13. #13
    Join Date
    Mar 2009
    Location
    Sydney
    Posts
    67

    Default

    Quote Originally Posted by izzy_a View Post
    Yep, that's it. Maybe it was on special when I got it, pretty sure it was only a couple of bucks.

  14. #14
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default

    I’ve made quite a few different batches. I find 1 part beeswax to 4 parts mineral oil to be a bit too hard. It’s fine if you’re applying it to a small surface area like a small cutting board, but I like it to be easier to apply. So I tried 1 part beeswax to 5 parts mineral oil and that’s my go to ratio. I can easily scoop it out of the container and it’s easy to apply.

    I then got some food grade orange oil and mixed 1/3 mineral oil, 1/3 beeswax and 1/3 orange oil. This consistently goes on easily and is my favourite. I bought around 60 of those 150gram containers and just write the ratios on top.

    I got a 1KG block of medical grade beeswax for about $55 and use the mineral oil from ikea. I know you can get it cheaper than this if you do some research. This way you can make up and experiment with different ratio and see what works for you.

  15. #15
    Join Date
    Jun 2016
    Location
    Sydney
    Posts
    8

    Default

    Quote Originally Posted by groeneaj View Post
    I’ve made quite a few different batches. I find 1 part beeswax to 4 parts mineral oil to be a bit too hard. It’s fine if you’re applying it to a small surface area like a small cutting board, but I like it to be easier to apply. So I tried 1 part beeswax to 5 parts mineral oil and that’s my go to ratio. I can easily scoop it out of the container and it’s easy to apply.

    I then got some food grade orange oil and mixed 1/3 mineral oil, 1/3 beeswax and 1/3 orange oil. This consistently goes on easily and is my favourite. I bought around 60 of those 150gram containers and just write the ratios on top.

    I got a 1KG block of medical grade beeswax for about $55 and use the mineral oil from ikea. I know you can get it cheaper than this if you do some research. This way you can make up and experiment with different ratio and see what works for you.
    That’s excellent! Will definitely give it a go. Thanks

Similar Threads

  1. Howard butcher block alternatives
    By izzy_a in forum FINISHING
    Replies: 0
    Last Post: 24th July 2018, 11:03 PM
  2. Urethane Gel for Butcher Block
    By Eli in forum FINISHING
    Replies: 19
    Last Post: 2nd December 2007, 07:57 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •