Results 1 to 9 of 9
  1. #1
    Join Date
    Jun 2004
    Location
    Hobart, Tasmania
    Posts
    61

    Default Can I remove these

    Hi,

    I'm about to install some underfloor insulation in a 1950s double brick home.

    These supports (see photo) are in my way. I suspect that they were there to keep floor joists in the right spot before flooring was added? And also to stop the tas oak joists from warping if they weren't entirely dry.

    Can I remove them? All thoughts very appreciated.

    Cheers

  2. #2
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    Pictures please
    The person who never made a mistake never made anything

    Cheers
    Ray

  3. #3
    Join Date
    Jun 2004
    Location
    Hobart, Tasmania
    Posts
    61

    Default

    yep working on it. Doesnt seem that i have permission to for some reason...

  4. #4
    Join Date
    Mar 2009
    Location
    Brisbane
    Posts
    7

    Default

    Just hold fire for a while.
    The boffins in the background are working on a forum problem.
    We are all getting the same msg abt no access to post an attachment.

  5. #5
    Join Date
    Jun 2004
    Location
    Hobart, Tasmania
    Posts
    61

    Default

    thanks mike, I'll stop trying to work it out. cheers

  6. #6
    Join Date
    Jun 2004
    Location
    Hobart, Tasmania
    Posts
    61

    Default

    photo attachedIMG_6320.JPG

  7. #7
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    short answer -- nope

    structurally those braces are to stop the floor joists "falling over" which they can do even after the floor is added
    regards from Alberta, Canada

    ian

  8. #8
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    No, they are a structural element that adds to the torsional rigidity of the floor and as Ian said they stop the joists rotating under load.
    The technical term is herringbone strutting and is rarely if ever used today as it is fairly labour intensive and much slower to do. The method used 99.99% of the time now is solid bridging, ie: a slide block of wood 20mm narrower than the depth of the joists and centered so there is 10mm clearance top and bottom to allow for air circulation and eliminate high points in either the floor on top or a ceiling underneath as well as squeaking (when traffic on the floor rubs on the top of the solid bridging.
    The person who never made a mistake never made anything

    Cheers
    Ray

  9. #9
    Join Date
    Jun 2004
    Location
    Hobart, Tasmania
    Posts
    61

    Default

    Thanks guys, I'll leave them in and insulate around them as best I can

Similar Threads

  1. Best way to remove ticks?
    By Dengue in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 12
    Last Post: 1st October 2015, 07:27 PM
  2. ho to remove tru-oil
    By old_picker in forum FINISHING
    Replies: 6
    Last Post: 24th August 2010, 09:25 AM
  3. When to remove formwork?
    By Reno RSS Feed in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etc
    Replies: 0
    Last Post: 21st March 2009, 07:30 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •