![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Poly + formby's
-
14th March 2018, 06:41 AM #1
New Member
- Join Date
- Mar 2018
- Location
- gainesville florida
- Age
- 31
- Posts
- 1
Poly + formby's
I just mixed polyurethane with formby's tung oil finish and applied to red oak. This was following two coats of plain old formbys. I wanted to thin the poly but had no mineral spirits on hand and thought formbys is probably thinned with mineral spirits so how bout i just use that. Now im trying to find out WHAT THE HECK IS IN FORMBY'S, cant find anything specific on the internet. Any knowledge on formbys eapecially mixing it with poly would be much appreciated.
Similar Threads
-
Oil & Poly
By BozInOz in forum FINISHINGReplies: 1Last Post: 17th August 2008, 09:36 AM -
Rub on poly won't dry? What to do?
By ahemsa in forum FINISHINGReplies: 13Last Post: 16th August 2008, 11:00 AM -
Formby's Lemon Oil Treatment
By clarence1 in forum FINISHINGReplies: 1Last Post: 15th July 2008, 04:51 PM -
1:) Danish with poly and 2:) Poly over white/hard shellac ?
By barryr in forum FINISHINGReplies: 6Last Post: 6th August 2005, 02:11 PM