Thanks Thanks:  1
Likes Likes:  2
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  1
Results 1 to 6 of 6
  1. 13th December 2017, 04:58 PM #1
    Omnius
    Omnius is offline New Member
    Join Date
    Aug 2017
    Location
    Tasmania
    Age
    44
    Posts
    3
    Post Thanks / Like

    Default Hi from Launceston

    Hello everyone.

    I am a Naval architecture student at AMC. I have decided to start building boats that I design in my small single garage.
    I am building my workshop up from nothing. I have already built my work bench with some Tassie Oak I found under the house and MDF.
    I have joined to learn from the vast experience of the members here. (I hope the Photo situation gets resolved soon)

    cheers all.
    Reply With Quote Reply With Quote
  2. Post Thanks / Like - 1 Thanks, 0 Likes, 0 , 0
    Thanks crowie thanked for this post
  3. 13th December 2017, 08:57 PM #2
    KBs PensNmore
    KBs PensNmore is offline GOLD MEMBER
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    293
    Post Thanks / Like

    Default

    Welcome to a TOP FORUM Omnius. Have you found the section on boats etc?? Please post some pics of your work and WIP (Work In Progress) reports, when you can.
    Kryn
    To grow old is mandatory, growing up is optional.
    Reply With Quote Reply With Quote
  4. 14th December 2017, 03:05 PM #3
    old1955
    old1955 is offline GOLD MEMBER
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570
    Post Thanks / Like

    Default

    Welcome to the forum.
    Reply With Quote Reply With Quote
  5. 14th December 2017, 05:59 PM #4
    Omnius
    Omnius is offline New Member
    Join Date
    Aug 2017
    Location
    Tasmania
    Age
    44
    Posts
    3
    Post Thanks / Like

    Default

    Quote Originally Posted by KBs PensNmore View Post
    Please post some pics of your work
    Kryn
    ok here is my workbench that I designed in sketchup first and then built using the timber I found under the house, mainly Tas Oak both dressed and rough sawn and 16mm MDF.

    wb skup.JPGDSC_0320 fix.jpg

    I will be installing a small vice soon.
    Reply With Quote Reply With Quote
  6. Post Thanks / Like - 0 Thanks, 2 Likes, 0 , 1
    Likes Cal, KBs PensNmore liked this post
    KBs PensNmore
  7. 15th December 2017, 08:42 AM #5
    JJF's Avatar
    JJF
    JJF is offline GOLD MEMBER
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,893
    Post Thanks / Like

    Default

    Welcome to the forum
    Reply With Quote Reply With Quote
  8. 21st December 2017, 09:25 AM #6
    crowie's Avatar
    crowie
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576
    Post Thanks / Like

    Default

    G'Day & Welcome to a top forum "Omnius".
    There are quite a few members across the Tassie area plus the rest of the country.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork......
    Cheers crowie
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. G'Day from Launceston. Howtheyhangin?
    By MarcusH in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 14th February 2013, 10:21 PM
  2. G'Day from Launceston
    By tazchris in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 19th September 2008, 12:21 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules