Results 1 to 9 of 9
-
6th December 2017, 07:31 PM #1GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 0
Best Finish for a small Timber Cufflink
Hi all,
I am making a timber Cufflink set. Using Tasmanian Myrtle. What would be the best and easiest finish to apply. Something that would give me a nice glossy look.
I am thinking Wipe on Poly,.?
I want the finish to be easy to apply, just with a rag, maybe 2 or 3 coats, but simple and effective.
Any suggestions,
Paul
-
6th December 2017, 10:25 PM #2
It would be good to see the cufflinks
Rustins plastic coating would work well in this situation. I have used it for a few projects and it works well ..... not my preferred finish but good for the right situation.
https://www.cwsonline.com.au/shop/ca...lastic-coatingNow proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
6th December 2017, 11:45 PM #3
Shellawax. Buff it on.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
7th December 2017, 02:44 AM #4
rattle can clear ?
regards from Alberta, Canada
ian
-
7th December 2017, 06:22 PM #5GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 0
Thanks gentlemen,
I looked at all of those, that plastic one looks good, might be a bit fiddly for a small cufflink. I was at Bunnings today and decided to go with the Wipe On Poly. I'll do a pic when its done,
thanks again
Paul
-
8th December 2017, 02:49 PM #6GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 0
MinWax Tung Oil Protective Finish. A witch's brew with some Tung Oil in it.
Four coats is water wet glossy.
I have timber cuff links with a satin finish. 50 years old and I'm still glad they are not glossy.
-
8th December 2017, 06:04 PM #7GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 0
Thanks for that last suggestion also. I have to be very careful when using things with tung oil in them. My wife suffers very badly from asthma and allergies. And she cant handle the smell of tung oil. Some timbers I have to avoid also.
Thanks again
Paul
-
8th December 2017, 10:04 PM #8
I hope I’m not too late but the forum sponsor’s Aussie Oil is made for exactly this purpose. It gives a beautiful gloss finish, doesn’t look ‘plasticky’ and is applied with the corner of a clean rag.
Our Benevolent Dictator advises in the instructions that it is for small objects but I have pushed it as far as A5 sized boxes.
I am also a chronic asthma sufferer but have felt no ill effects. I highly recommend it.
flettya rock is an obsolete tool ......... until you don’t have a hammer!
-
9th December 2017, 01:25 PM #9GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 0
Hey there Fletty,
Thank you very much for pointing me towards this product. These seems perfect and ideal for just what I need. I just ordered the bottle of it, and looking forward to testing it out.
Thanks again
Paul
Similar Threads
-
Help for challenging small sliding lid box finish
By Studiovape in forum FINISHINGReplies: 40Last Post: 1st May 2016, 04:20 AM
Bookmarks