What type of weatherboards are these

[Arron]

Hi, can anyone give me the correct name for this type of weatherboard. They are made from masonite - about 200mm high. I need to replace some.

thanks
Arron

[bennylaird]

Thats easy, they are white ones.




Sorry... Probably Hardie-Plank I'd guess

[bennylaird]

http://www.lookhome.com.au/Products/...moothCladding/

This sort of thing?

[ThePope]

looks like the old Weathertex weatherboard, still available too...
http://www.weathertex.com.au/product.aspx?ProdType=1

[Gumby]

I think His Eminence is correct. I doubt they are masonite, that wouldn't last 5 minutes without protection. Weathertex etc lasts years even if not painted.

[Auspiciousdna]

If they are made from a form of masonite which I have used years ago, you may be out of lucky, many have been discontinued if not all.

[ThePope]

they are masonite, if memory serves, possibly tempered masonite.
used them many times in the past.

[Gumby]

I'm happy to be corrected your holiness. I just thought masonite wasn't weatherproof. I defer to your ethereal knowledge

[Craig Pywell]

http://www.weathertex.com.au/

I think you will find these are weathertex. Have a look at the link above.

Good luck!!!!


Craig

[silentC]

Weathertex IS masonite.... I reckon they's Weathertex... If they're brown, that's what they are. Yup...

[ThePope]

I'm happy to be corrected your holiness. I just thought masonite wasn't weatherproof. I defer to your ethereal knowledge

All I do is cut and nail the buggers on, I leave the weatherproofing up to god

[Arron]

Thanks guys. They are definitely some type of masonite - there is a hole in one so I can see it. If weathertex is masonite, then weathertex they are.

Incidently, they are on the exterior of our house but under the shelter of a patio, so not really in the weather. Does look a pretty cheap and crummy way to build, though.

Arron

[silentC]

Weathertex is, as the name implies, weather proof. Masonite is a tradename for hardboard, which is what Weathertex is. The yanks still call it hardboard but we call it masonite here. However, when people think of masonite, they think of the thin slightly crumbly stuff that they often put under carpet and lino on timber floors and the backs of cupboards etc.

It's actually a very good product and I would have considered using it on my place if not for the fire regs here requiring non-flamable cladding.

Here's some trivia for you: it's called masonite because the fibres it is made from are produced in barrels called Mason guns. The woodchips are blasted with steam which breaks the chips into fibres and then these fibres are compressed into the sheet you see.

[ozwinner]

All I do is cut and nail the buggers on, I leave the weatherproofing up to god

Pontius Pilot???

Sorry I have just watched Life Of Brian again.

Al

[scooter]

Silent, I think it's actually named after the US inventor, William Mason. Those "Mason guns) probably are too.

My father in law calls it Burnie Board, which was a locally made version.


Cheers.............Sean, hopefully not too (hard)boaring