Thanks: 9
Likes: 14
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 22 of 22
Thread: Australian Business Model???
-
15th June 2017, 12:14 AM #16Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 108
Rydell in Moorabbin will make you one to whatever size you like.
-
15th June 2017, 01:23 PM #17rrich Guest
For "V" type belts, an auto supply store may be your best bet.
The 'Link' belt always seems to work except when multiple belts are used over the same pulley set.
-
15th June 2017, 05:37 PM #18Senior Member
- Join Date
- May 2009
- Location
- Peoples Republic of Bryn
- Posts
- 59
i remember the 7 year rule on parts, shame to hear that it's gone to industry regulated (when has industry regulation ever really worked for the customer??)
That will mean they will be cheap to reduce stock holdings and then just ask expensive prices for the part, and use that as an excuse no one buying, to stop keeping parts.
Hope you find a reasonably priced belt, that fits your machine without spending hours and hours of chasing one down.
-
18th June 2017, 12:25 PM #19Senior Member
- Join Date
- Apr 2012
- Location
- Thornton NSW
- Posts
- 8
Can you read the code on the original belt? Is it a plain belt or a wedge belt? Possibly a metric belt not the common A or B section imperial belts?
I have this chart printed out as a handy reference guide, it might help if you can't read the belt code:
http://www.industrialbearings.com.au...1339565382.pdf
-
18th June 2017, 06:45 PM #20GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 408
Thanks Richmond.
I had some success at a specialist belt supplier, and fitted the belt yesterday.
Whilst the sectional profile is not the same, it works well, and I am one happy chappy.
Thanks all for the suggestions (and puting up with my rant).
-
18th June 2017, 08:51 PM #21GOLD MEMBER
- Join Date
- Aug 2016
- Location
- Brisbane
- Age
- 57
- Posts
- 80
I work in a different industry but I'd just like to add that few people realise the hidden costs of stocking parts for some future possible use. Especially with the high overheads for business in Australia.
Those costs have to be recouped.
Then we want tools at prices that are not so much more than overseas.
It's not an easy business.
Sent from my SM-G935F using TapatalkMy YouTube channel: https://youtu.be/2_KPRN6I9SE
-
18th June 2017, 09:02 PM #22Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 710
As long as it's driving through through more than 2/3rds to 3/4 of the sides of the belt and not the bottom or edge riding on the sides, it should be OK.
Similar Threads
-
Air B&B Any experience with the business model
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 8th August 2015, 12:50 PM