Results 16 to 28 of 28
Thread: Am I being unreasonable?
-
23rd September 2005, 02:06 PM #16
My Fusher and Parkle washing maching was place on the nature strip for rubbish removal day. Some silly b........ picked it up. Wish him luck lol, was on it's 4th processor board at $190 a go.
-
23rd September 2005, 02:54 PM #17
its nice to have a lovely stainless steel "yard statement / garden furniture" innit ???
get the valve and relay models boys.
Ive got aussie made hoover fridge and washer (the dishwasher is a whirlpool) and they are unkillable, we had a grinding noise in the washing machine once and we though bugger! its dying, we'll use this as an oppotunity to get a front loading stainless meile (or something) but before we did we got in the repair man to have a look. he had a look and poked his head underneath - seems the plastic cockroach bait was caught on the axle and it was being turned with the washing! didnt we look dumbo? 2 yrs later its still powering along.
get the valve and relay models boys. get the valve and relay models... cct boards are fine in areas such as the north of germany where its cold enough to freeze a monkeys nads but here in aussie where roaches, mice, rats and assorted vermin make thier home its not on. the tracks on cct boards are only a mm apart at most so if a roach poops on it you're up the ppop... so to speak.Zed
-
23rd September 2005, 03:22 PM #18
Absolutely Zed.
We've had the same old dishwasher for 12 years. 2 service visits, one to remove a dead mouse and the other to replace a pressure valve.
Unsophisticated as buggery, but just goes on and on. Its copes with abuse too, I refuse to pre wash the dishes, just stick em in (whats the point in a dishwasher if you wash em first?). Doesn't complain, just needs filters cleaned occasionally.
Zeds right on, the Oz kitchen is no place for delicate. high tech circuitry. Even the service guy said as much and advised stay with the crude Oz manufactures.
A bit like the Sukhoi fighter that 'crashed' at the Paris Airshow. Wheels refused to come down and it belly landed. After the show the Russians just lifted it up with a crane, manually lowered the wheels, fuelled up, the pilot hopped in and off he flew to the Motherland.
The Seppo spectators refused to believe what they had just seen happen. Not possible they said.Bodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
23rd September 2005, 03:32 PM #19
-
23rd September 2005, 04:37 PM #20
They don't make em like they useter
Geez, I suppose there's duds in every batch, but, touch lots of wood, I've had the same Fusher nd Pickle washing machine, dryer, fridge and freezer for over 13 years or so with only one service call (on the washer which had a bit of wire stuck in the outlet stopping the impeller) in all that time. Inherited an ASEA dishwasher with the house which is also 13 years old and still works although it's better to wash up in the sink, quicker and saves about a swimmingpool full of water.
Cheers,
Graeme
-
23rd September 2005, 04:51 PM #21Originally Posted by bitingmidge
Greamet - thats the key. 13 yrs old. The NZ and the Asian brands have moved on, the Email brands still evidence the best techology to come out of the 1960'sBodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
23rd September 2005, 06:09 PM #22Originally Posted by Wood BorerWhatever note you blow youre never more than a semitone away from the correct one....(Miles Davis)
-
23rd September 2005, 06:12 PM #23Originally Posted by bennylaird
Had the same experience with my F and P washing machine. Those processor boards constitute 90% of the total cost of the machine. Went and bought myself an ASKO and havent had any trouble with it for last 3 years.Whatever note you blow youre never more than a semitone away from the correct one....(Miles Davis)
-
23rd September 2005, 08:57 PM #24Member
- Join Date
- Jul 2003
- Location
- Sunny Coast
- Age
- 40
- Posts
- 16
My grandfather bought an ASKO well over 10 years ago and it has been one hell of a good dishwasher. Only one problem (caused by my grandmother, she put in dishwashing liquid instead of dishwasher powder) and that was the wiring harness had to be replaced, $400. However, I think she was charged an awfull lot because she had to pay for an apprentice that just sat around watching. She was told though that it is very uncommon for an ASKO to need that kind of repair. Anyway, we have just bought an ASKO dishwasher and it is great! It's got this power spray thingy and we decided to put it to the test, burnt on rice on a stainless steel pot, chucked her in over the power spray, put it on the intensive wash and she comes out spotless. In my opinion the ASKO is well worth the extra dollars.
Nik.
-
24th September 2005, 09:37 AM #25
We have all Blanco kitchen appliances, booootiful, work well and haven't missed a beat, Effen-p washing machine is OK but SWMBO doesn't like it(she also overloads it).
Worst I have had is GE, every single appliance died, except the Washing machine which was a rebadged Hitachi.
My Chinese abacus is good too, never missed a beat and is deadly accurate.Stupidity kills. Absolute stupidity kills absolutely.
-
26th September 2005, 08:46 AM #26Originally Posted by kiwigeo
Like the Chilly Bin is the place to start......
ANd if the woman is handing out the beer ask for half a dozen or you may get slapped????
-
26th September 2005, 10:40 AM #27Originally Posted by graemet
Richard
-
26th September 2005, 07:49 PM #28GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 42
Mate lves in the 'Inner City' area & has problems with 'roaches invading his electrics - he recons he will seal the next lot in RTV silicone rubber, then watch the little B's P on that.
Bookmarks