Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Durden Pacemaker part required
-
11th March 2017, 11:43 AM #1
New Member
- Join Date
- Mar 2017
- Location
- Bundaberg
- Age
- 65
- Posts
- 3
Durden Pacemaker part required
Have just purchased a SP10-600 model and wondering if anyone would possibly have a spare mitre quadrant set up for sale or any idea where I could find one please
-
14th March 2017, 02:50 PM #2
Senior Member
- Join Date
- Sep 2011
- Location
- Northern Beaches, Sydney
- Age
- 68
- Posts
- 298
I think what you are after is a mitre gauge. If no-one replies here your best bet may be either ebay or Gumtree for a secondhand one. You will have to measure the width and depth of the rebate in the tablesaw top so that you are buying one that will fit. Remember also that these would be imperial measurements for an older saw like that. Easy to convert to metric measurements though.
Good luck.
Stewie
-
15th March 2017, 02:12 PM #3
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 3,150
I have one the slide needs the Scotch-Brite treatment, pm your address and I will post it when I get back on Monday
-
15th March 2017, 03:43 PM #4
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 3,150
Just to be sure is this the part you want
durden mitre slide.jpg
-
17th March 2017, 09:15 PM #5
Thrifty not stingy..
- Join Date
- Feb 2007
- Location
- Adelaide SA
- Age
- 60
- Posts
- 0
Let me know if you'd like a copy of the original manual for the SP10-600. I have one of these machines that belonged to my grandfather and I have a scan copy of the manual.
