Thanks: 0
Likes: 2
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Wsl
-
10th March 2017, 03:56 PM #1
Wsl
Ahhhhh WSL. 6 draw backs stacked and scms the Wrong Side of the Line. Ahhhhhhhh
6 too short boards.......
-
10th March 2017, 06:39 PM #2
Didn't X the waste side?
There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
10th March 2017, 09:00 PM #3GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 279
I feel your pain. I usually set up stops, but even that has led to six pieces 10mm short!
-
11th March 2017, 05:51 AM #4GOLD MEMBER
- Join Date
- Oct 2007
- Location
- vic clayton
- Posts
- 0
worked with a bloke. after second week on the job we called him 10 as he was invariably 10 over or 10 under
Some people are like slinkies - not really good for anything, but they
bring a smile to your face when pushed down the stairs .
-
11th March 2017, 06:08 PM #5
I know the pain.
Building an aluminum fence that was powder coated. Client wanted a different color so I painted enough lengths to do the fence. On site each length was cut down in pairs. Miss read tape measure and cut two, too short. Had to use two unpainted lengths and paint after installation.
-
11th March 2017, 10:20 PM #6Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 710
I also know the pain. Morticed both ends of a rail, then had to cut a recess in between. Went to lunch and came back. Brain fade and the first cut went the full length, straight through the mortises!